Given the striking similarities of the TrimUI Brick to the Analogue Pocket, I thought it deserved a dock that looked the same as well.

All of the dimensions were to scale, but the dock was unnecessarily deep for the Brick, so I created this "Slim" version to better suit the device.

Utilizing the ubiquitous magnetic charging cables, it is also a great place to give your Brick a charge: https://www.amazon.com/dp/B08F7586NK?ref_=cm_sw_r_cp_ud_dp_S47B81E0QJNAYYDSWLBM&peakEvent=5&dealEvent=0&skipTwisterOG=1

TrimUI Brick Dock - Analogue Pocket Style (Slim)

TrimUI Brick - Analogue Dock Slim V2.stl

This is a very basic organizer for any small items. I use it to hold a few spare batteries, allen keys, spare screws, etc. 

This is the Gridfinity version of my espresso organizer. I call this version of Gridfinity "Underengineered" as I have removed the stacking crown and the corner radii. This makes for a cleaner and nearly seamless top look if all of the bins are the same height. 

This was originally a tabletop organizer that aligned with an alternating magnetic pattern. I thought that these would work well with gridfinity, as the dimensions were already almost the same at 40mm increments, so I adapted it. If there is interest, I will also clean up and release those desktop files. 

Images will be updated when I can.

EOS | Espresso Organizer System - Assorted Tool Bin

GF - Espresso Organizer System - Assorted Tool Bin.stl

GF - Wyze Handheld Vacuum - Magnetic Charging Dock.stl

This is an organizer for the timemore black mirror basic 2 scale (https://a.co/d/aCqJQNv), and a generic RDT spray bottle (lipstick style or any slim sprayer) The base perfectly accomodates the scale, making sure to hold it away from the walls. It also allows you to reach the power switch without removal from the holder. 

This is the Gridfinity version of my espresso organizer. I call this version of Gridfinity "Underengineered" as I have removed the stacking crown and the corner radii. This makes for a cleaner and nearly seamless top look if all of the bins are the same height. 

This was originally a tabletop organizer that aligned with an alternating magnetic pattern. I thought that these would work well with gridfinity, as the dimensions were already almost the same at 40mm increments, so I adapted it. If there is interest, I will also clean up and release those desktop files. 

Images will be updated when I can.

EOS | Espresso Organizer System - Scale and Spray Bottle

GF - Espresso Organizer System - Scale and Spray Bottle.stl

This is a model that holds a standard 58mm dosing funnel and two puck screens. The model props the funnel up at a slight angle so that it is easier to grab without disrupting adjacent holders.

This is the Gridfinity version of my espresso organizer. I call this version of Gridfinity "Underengineered" as I have removed the stacking crown and the corner radii. This makes for a cleaner and nearly seamless top look if all of the bins are the same height. 

This was originally a tabletop organizer that aligned with an alternating magnetic pattern. I thought that these would work well with gridfinity, as the dimensions were already almost the same at 40mm increments, so I adapted it. If there is interest, I will also clean up and release those desktop files. 

Images will be updated when I can.

EOS | Espresso Organizer System - Funnel and Screens Holder

GF - Espresso Organizer System - Funnel and Screens Holder.stl

This is a holder for a very specific spoon that I use for my espresso. The spoons can be found here: https://a.co/d/42jkx2Q

This is the Gridfinity version of my espresso organizer. I call this version of Gridfinity "Underengineered" as I have removed the stacking crown and the corner radii. This makes for a cleaner and nearly seamless top look if all of the bins are the same height. 

This was originally a tabletop organizer that aligned with an alternating magnetic pattern. I thought that these would work well with gridfinity, as the dimensions were already almost the same at 40mm increments, so I adapted it. If there is interest, I will also clean up and release those desktop files. 

Images will be updated when I can.

EOS | Espresso Organizer System - Spoon Holder.stl

GF - Espresso Organizer System - Spoon Holder.stl

This is a model to fit a standard size dust blower bulb, and a small brush. I had to cut and reshape my brush handle, though some other may fit. I wanted these two items to live together per their function. Please note that this is for the smaller nozzle length bulbs, but could be modified to hold the longer type, though it would hang over the edge. I will happily release a 2x4 plate model that allows for a longer brush and nozzle upon request.

This is the Gridfinity version of my espresso organizer. I call this version of Gridfinity "Underengineered" as I have removed the stacking crown and the corner radii. This makes for a cleaner and nearly seamless top look if all of the bins are the same height. 

This was originally a tabletop organizer that aligned with an alternating magnetic pattern. I thought that these would work well with gridfinity, as the dimensions were already almost the same at 40mm increments, so I adapted it. If there is interest, I will also clean up and release those desktop files. 

Images will be updated when I can.

EOS | Espresso Organizer System - Distributor Holder.stl

GF - Espresso Organizer System - Distributor Holder.stl

This is a holder for the full portafilter handle. I would recommend using PETG or ABS so that it can be used when portafilter is still warm. If you plan to only store portafilters in here, it wouldn't matter. This is the smaller basket ring opening model, that fits most portafilters - this one is 70mm (measure just under the "wings" of your specific portafilter).

This is the Gridfinity version of my espresso organizer. I call this version of Gridfinity "Underengineered" as I have removed the stacking crown and the corner radii. This makes for a cleaner and nearly seamless top look if all of the bins are the same height. 

This was originally a tabletop organizer that aligned with an alternating magnetic pattern. I thought that these would work well with gridfinity, as the dimensions were already almost the same at 40mm increments, so I adapted it. If there is interest, I will also clean up and release those desktop files. 

Images will be updated when I can.

EOS | Espresso Organizer System - Portafilter Holder - Smaller Opening

GF - Espresso Organizer System - Portafilter Holder - Smaller Opening.stl

This is an organizer for 58mm spring tamper from Normcore. I cut a very small piece of EVA foam to sit down in the bottom of the plate well, so that placing the tamper in wouldn't scratch or otherwise blemish the metal.

This is the Gridfinity version of my espresso organizer. I call this version of Gridfinity "Underengineered" as I have removed the stacking crown and the corner radii. This makes for a cleaner and nearly seamless top look if all of the bins are the same height. 

This was originally a tabletop organizer that aligned with an alternating magnetic pattern. I thought that these would work well with gridfinity, as the dimensions were already almost the same at 40mm increments, so I adapted it. If there is interest, I will also clean up and release those desktop files. 

Images will be updated when I can.

EOS | Espresso Organizer System - Normcore Tamper Holder

GF - Espresso Organizer System - Normcore Tamper Holder.stl

This is an organizer for 58mm paper filters. This can be turned to the angle of your preference, but is designed to have the cutout facing away, and the filter easily slide against the near wall 

This is the Gridfinity version of my espresso organizer. I call this version of Gridfinity "Underengineered" as I have removed the stacking crown and the corner radii. This makes for a cleaner and nearly seamless top look if all of the bins are the same height. 

This was originally a tabletop organizer that aligned with an alternating magnetic pattern. I thought that these would work well with gridfinity, as the dimensions were already almost the same at 40mm increments, so I adapted it. If there is interest, I will also clean up and release those desktop files. 

Images will be updated when I can.

EOS | Espresso Organizer System - 58mm Filter Holder

GF - Espresso Organizer System - 58mm Filter Holder.stl

This is a very basic organizer for any long tools. I use it for a few latte art design picks, and a grouphead brush. 

This is the Gridfinity version of my espresso organizer. This was originally a tabletop organizer that aligned with an alternating magnetic pattern. I thought that these would work well with gridfinity, as the dimensions were already almost the same at 40mm increments, so I adapted it. If there is interest, I will also clean up and release those desktop files. 

Images will be updated when I can.

EOS | Espresso Organizer System - Grouphead Brush and Design Picks

GF - Espresso Organizer System - Grouphead Brush and Design Picks.stl

This is an organizer for various 58mm baskets. This can accommodate various depth and style baskets to fit your set up.

This is the Gridfinity version of my espresso organizer. This was originally a tabletop organizer that aligned with an alternating magnetic pattern. I thought that these would work well with gridfinity, as the dimensions were already almost the same at 40mm increments, so I adapted it. If there is interest, I will also clean up and release those desktop files. 

Images will be updated when I can.

EOS | Espresso Organizer System - 58mm Basket Holder

GF - Espresso Organizer System - 58mm Basket Holder.stl

This is for the manual WDT from Subminimal (https://subminimal.com/products/flick), called Flick. It also holds the 3D printed WDT model from Kensei on printables, (https://www.printables.com/model/488684-bearing-based-spirographic-wdt-tool)

This is the Gridfinity version of my espresso organizer. This was originally a tabletop organizer that aligned with an alternating magnetic pattern. I thought that these would work well with gridfinity, as the dimensions were already almost the same at 40mm increments, so I adapted it. If there is interest, I will also clean up and release those desktop files. 

Images will be updated when I can.

EOS | Espresso Organizer System - Dual WDT Dock

GF - Espresso Organizer System - Dual WDT Dock.stl

This is for an espresso brush, from MHW-3Bomber (https://www.amazon.com/gp/product/B0CM3F35FC)

This is the Gridfinity version of my espresso organizer. This was originally a tabletop organizer that aligned with an alternating magnetic pattern. I thought that these would work well with gridfinity, as the dimensions were already almost the same at 40mm increments, so I adapted it. If there is interest, I will also clean up and release those desktop files. 

Images will be updated when I can.

EOS Espresso Organizer System - Portafilter Brush Holder

GF - Espresso Organizer System - Portafilter Brush Holder.stl

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

hardw_re

Achievements

Explorer

Seedling

Debutant