tracking pixel
gazzaladra

Mushroom vase “Gleophyllum Abietinum”

by
gazzaladra
Follow
Follow
Remix Model
gazzaladra
gazzaladra
Image 1 of 6
Mushroom vase “Gleophyllum Abietinum” 3d model
2D
3D
Makes
instagram-play
Mushroom vase “Gleophyllum Abietinum” 3d model
Mushroom vase “Gleophyllum Abietinum” 3d model
Mushroom vase “Gleophyllum Abietinum” 3d model
Mushroom vase “Gleophyllum Abietinum” 3d model
Mushroom vase “Gleophyllum Abietinum” 3d model
Mushroom vase “Gleophyllum Abietinum” 3d model
This model is restricted by licensing terms. 
28 Likes35 DownloadsJune 14, 2023
This model is restricted by licensing terms. 


A unique vase for flowers.

Scaling / size

  • Upscaling (100% +): as big as you want
  • Regular size (100%): 168 x 165 x 216 mm – has a wall thickness of 2 mm
  • Smaller (80%): 134 x 132 x 173 mm – has a wall thickness of 1.6 mm
  • Minimum size (60%): 100 x 99 x 130 mm – has a wall thickness of 1.2 mm
  • Everything smaller than that is not tested but probably possible

Print settings Material usage (100% scale): 270g Print time: (100% scale): 22h

Material usage (80% scale):160g Print time: (80% scale): 13h

Material usage (60% scale): 80g Print time: (60% scale): 7h

Material: PLA Print direction: stl is rotated correctly, check images Support: none Nozzle size: 0,4 mm Line width: 0,4 mm Layer height 0,2 mm Outer walls: 3 Infill: 15% Build plate adhesion type: none

Watertight printing: If you have a well set up machine it comes automatically - Otherwise here are some tips: Increase your wall count (at least 3), level your bed nicely, decrease print speed, increase layer height (at least 0.2mm), increase print temperature, check your seam quality, calibrate your e-steps and fine tune your retraction settings to make sure no holes appear after a layer change.


28 Likes35 DownloadsJune 14, 2023




This model is restricted by licensing terms. 
28 Likes35 DownloadsJune 14, 2023
This model is restricted by licensing terms.