Three stackable boxes that form a beautiful tree trunk. Tree: Larix Decidua

Scaling / size You can scale the parts as you wish from 50% to 100%+ The prints in the photos are 80% scale

• Upscaling (100% +): as big as you want
• Big (100%): Diameter of about 200 mm with a segment height of 100 mm (300 mm in total)
• Regular (80%): Diameter of about 160 mm with a segment height of 80 mm (240 mm in total)
• Small (50%): Diameter of about 100 mm with a segment height of 50 mm (150 mm in total)

Print settings Material usage for all parts (100%): 1 kg Print time for all parts (100%): 60 h

Material usage for all parts (80%): 600g Print time for all parts (80%): 36 h

Material usage for all parts (50%): 220g Print time for all parts (50%): 15h

Material: PLA Print direction: stls are rotated correctly, check images Support: none Nozzle size: 0,4 mm Line width: 0,4 mm Layer height 0,2 mm Outer walls: 3 Infill: 15% Build plate adhesion type: none