A cute little bookmark sculpted after the mushroom “Morchella esculenta”. Plug the clip into the mushroom and you are ready to go! There are three slightly different morels included!

Size assembled: 15 x 15 x 85 mm

Print settings Required build volume: 100 x 100 x 30 mm Material usage: 3 g

Material: PLA Print direction: stls are rotated correctly, check images Support: none Nozzle size: 0,4 mm Line width: 0,4 mm Layer height 0,1 mm – 0,12 mm Outer walls: 3 Infill: 15% Build plate adhesion type: none