By confirming your subscription, you allow Thangs to charge your card for this payment and future payments in accordance with their terms. You can always cancel your subscription.
A unique fruit bowl made from 3d printed parts and commercially usual wooden skewers.
It uses very little material and is easy to assemble.
Instructions
Print the base
Buy a pack of wooden skewers –26 are required (you can get them for a dollar in most super markets or online) Size: 200mm x 3mm
Choose your tolerance: the design is provided with 0,1 for normal and 0.2 mm clearance for less accurate printers. Make your decision based on your experience with the accuracy of your machine. I used 0,1 and since the wood is soft it fits very well, and the skewers don’t fall out.
Place the skewers with the pointy side in the base
Enjoy!
Size assembled: 200 x 200 x 140 mm
This is the V2, the V1 is still included.
Print settings
Required build volume: 130 x 130 x40 mm
Material usage: 20g
Print time: 3h
Material: PLA
Print direction: stl is rotated correctly, check images
Support: none
Nozzle size: 0,4 mm
Line width: 0,4 mm
Layer height 0,2 mm
Outer walls: 3
Infill: 15%
Build plate adhesion type: none