Mushroom bookmark “Boletus Edulis”

A cute little bookmark sculpted after the mushroom “boletus edulis”. Plug the clip into the mushroom and you are ready to go!

Size assembled: 18 x 18 x 80 mm

Print settings Required build volume: 80 x 80 x 30 mm Material usage: 3 g

Material: PLA Print direction: stls are rotated correctly, check images Support: none Nozzle size: 0,4 mm Line width: 0,4 mm Layer height 0,1 mm – 0,12 mm Outer walls: 3 Infill: 15% Build plate adhesion type: none