Print at 100% infill with a layer height of 0.08mm with a base layer of 0.3mm

Filaments Used: PLA PolyTerra Charcoal Black Transmission Distance: 0.3 PLA PolyTerra Lava Red Transmission Distance: 1 PLA PolyLite Lemon Yellow Transmission Distance: 6.5 PLA PolyLite White Transmission Distance: 5

Swap Instructions: Start with Charcoal Black At layer #4 (0.54mm) swap to Lava Red At layer #5 (0.62mm) swap to Lemon Yellow At layer #8 (0.86mm) swap to White for the rest.