Introducing new clock design into our catalogue. This piece is designed to grace your desk, mantel, or bedside table with its refined style.

Very easy to print and assemble. Simply install the clock mechanism into the face and gently push it into the hole back of the clock frame. You have the option to print the clock hands or use the default ones coming with the mechanism.

Supports No supports needed

Scaling I wouldn't recommend scaling this model as it is designed to support a standard clock mechanism. The clock mechanism I am using is: https://www.amazon.co.uk/dp/B08VWCCK43

Model Dimensions Height: 19.5 cm / 11.42 inches Length: 12 cm / 6.89 inches Width: 6.3 cm / 6.89 inches

3D Printing Settings

Clock Face Layer Height: 0.2 mm Infill: 15%

Clock Frame Layer Height: 0.2 mm Infill: 15%

Clock Hands Layer Height: 0.2 mm Infill: 100%

NOTE: Because the clock hands are small, they break very easy. You need to be gentle, especially with the clock hands for seconds, doesn't need any pressure to fit it into the clock mechanism hole. Reduce the speed as low as possible so the seconds hand can be printed successfully.

Filament Used Bambu Dark Red Matte PLA Bambu Sakura Pink Matte PLA Bambu Black Matte PLA KINGROON White PLA

You are not authorized to use our pictures