Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:6167273.

This is a simple holder for AirTags to insert in the wallet.
The card is only 3mm thick so as not to cause particular discomfort.



Card for AirTag

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:6167281.

I was tired of the usual Scotch dispensers, so I decided to create one completely from scratch while maintaining the ease of use but also a modern design.
It is very simple and convenient to use.

Being composed of only 2 pieces, it is possible to make several different models to distinguish them more easily. It is designed to fit a roll of adhesive tape with an external diameter of 60mm and an internal diameter of 25/26mm (standard dimensions of a roll of adhesive tape), the thickness of the tape is 15mm.

On the cap there are 2 holes , the central one to facilitate closing/opening with a flathead screwdriver and a window to see the remaining level of tape. If you run out of tape it's very simple, unscrew, reload and screw again!

Print it now and create your favorite model with the colors of your choice

Scotch Dispenser 

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:6167312.

I was tired of seeing this unused hole on my desk, but I didn't want to make a simple and common cap, I wanted to do something that could come in handy.
This is how I immediately thought of making a drawer to tidy up small objects, such as USB sticks, etc…

This drawer is designed for desks that have an unused hole for the passage of cables, and you want to give it a utility.

The drawer slides on the frame, which remains attached to the desk, when the drawer is open it is supported by 4 magnets, 2 on the frame and 2 on the drawer, in this way if you need the drawer you can detach it very easily.

Print your drawer now and say goodbye to your ugly hole on your desk!

Pop-Up Desk Drawer

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:6194906.

This is a organizer for 50gr tobacco tin. It has 3 compartments for reorder little things.

Under there is a hole for a 5x2mm magnet, for more stability during a travel.

Diameter: 99mm

Height: 25mm

Organizer Tobacco Tin

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:6193593.

This is a very simple Pyramid puzzle to solve.

If you place the 5 pieces correctly in your slicer you will be able to print them all together, and then print the stand separately.I chose this colour for a good contrast together, but you can print them in a different colour.

Run to solve it!

Pyramid Puzzle

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:6126224.

This is a charger for 18650 battery. The module is an TP4056 USB-c, dimension are 21mmx25mm. The contacts I used are common contacts also used for AA batteries. The cable of the negative contact pass trought the base for not disturbing.

18650 Battery Charger 

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:6207174.

After printing your mold, insert the wick into its joint, tighten the two pieces of the mold (with the help of a bench vise or clamps), and pour the melted wax. 

After a few hours (when the wax is solid) your new candle will be ready.

I didn't use any type of lubricant, the wax came off the piece very easily.

To help you detach the two molds from each other, you can help yourself with a screwdriver by inserting it in the 2 holes on the side.

I tried printing this in PLA and it held up to temperatures, i recommend a fairly high filling.

Candle Diameter: 6cm

Candle Mold

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5642039.

This is a mini box for painting. You can put colour in this “box” and use it for painting.
You can use magnetic tape in the bottom of the half pans for a better resistance during movement.

Watercolor Half Pans

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:6299445.

Now, with this project, you can fix your LED controller on a wall.

You can fix it with bihadesive tape, but you can also use 4 tiny screw.


HOLDER FOR LED CONTROLLER (40 BUTTONS)

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:6212001.

I wanted an object to enhance my desk, so I decided to design this light bulb in Low-Poly.

The standing model will be approximately 9cm tall.

 

If you want to support me: https://www.paypal.com/paypalme/MaroDavide

Low-Poly Light Bulb

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:6127170.

This is a magnetic USB holer for your room. You can print it and fix it where you like with biadhesive tape. 

Print it and keep your USB in order!

The magnet dimension is 6x10x2

Magnetic USB Stand

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:6126250.

This is a M3 E30 wall-art, you can print it and fix it to a wall to decorate your room.



BMW M3 E30 Wall Art

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:6127162.

This is a mini shelf for your room. It’s useful for tiny objects, with this hexagonal design you can print more than one copy and put near for more space.



You can easy mount on a wall using 3 tiny screw.

Hexagonal Shelf

The other day I was looking at my candle, and I wondered if something could be done to improve its aesthetics, so I created a simple 56mm candle holder, to make your candles more beautiful.


Let me know what you think!

 

If you want to support me: [Thanks](https://www.paypal.com/paypalme/MaroDavide)

Spyral Candle Holder (56mm)

CE3E3V2_Candle Holder v4.stl

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

davide.marognoli

Achievements

Seedling