tracking pixel
D

Threaded ⅝ inch to ¾ inch pipe adapter.stl

by
dalaketh
Follow
Follow
Remix Model
Threaded ⅝ inch to ¾ inch pipe adapter.stl 3d model
2D
3D
Makes
Be the first to upload a make
5 Likes30 DownloadsJanuary 3, 2022


I found the first design was a bit too tight when screwed into a 3/4" adapter. I made a slight adjustment to that. I changed the tightening hexagon to an octagon and increased the thickness by 1mm to a total of 4mm. I had one break when I was tightening it all down into the pump and so I am trying again with 0.15mm layer height and another layer on the wall. Hope this helps someone. I also have this same 5/8" to a 3/4" slip adapter found here: https://thangs.com/dalaketh/-threaded-to--slip-adapterstl-42637?manualModelView=true


5 Likes30 DownloadsJanuary 3, 2022




5 Likes30 DownloadsJanuary 3, 2022