I binged the whole Fallout series on Prime recently and wanted to add this to my collection. I've been a Fallout fan for a really long time (the games got me through a lot of my university years) so this was very timely.

The print is grittier than my usual stuff, and this is on purpose. Mostly to showcase the post-nuclear, radioactive state of things in the world of Fallout.

It's a fairly simple print but it does take a while since the printer is Z-hopping all over the place to create the 'grittiness' of the print. My print time ended up being about 6 hours. It took slightly longer than usual to slice, but give it about 3 minutes or so, and it should be completed!

Loading the 3MF will give you the layer swaps for Bambu printers and Bambu Studio. If you do not use Bambu, you can load the STL and follow the instructions below!

Print Instructions

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:

• PLA Kingroon Black Transmission Distance: 0.3
• PLA CC3D Blue Gray Transmission Distance: 2.8
• PLA+ Sunlu Coffee Transmission Distance: 3
• PLA BambuLab Basic Jade White Transmission Distance: 5.6

Swap Instructions:

• Start with Black
• At layer #11 (0.96mm) swap to Blue Gray
• At layer #15 (1.28mm) swap to Coffee
• At layer #17 (1.44mm) swap to Jade White for the rest.

If you'd like my work and would like to support me, you can now subscribe to a Thangs membership plan! All paid prints are included in the membership (like this one!).

Joining will give you access to a private discord, all paid models, early access to some models as well as a commercial license to sell the physical prints of my models.

If a Thangs Membership is not your thing, I also have a Patreon that gives you the same perks!