Chugging right along with the same 'Starry Night' theme, here's the Dark Knight himself, overlooking Gotham under a brilliant night sky.

5 colours this time, and if you have a less 'Lemon' yellow than I do, it will probably look a little nicer! 3MF is included for Bambu Studio and Bambu printers. If you don't have either, please download the STL and follow the print instructions below:

Print Instructions Print at 100% infill with a layer height of 0.04mm with a base layer of 0.2mm

Filaments Used:

• PLA Kingroon Black Transmission Distance: 0.4
• PLA+ Overture Dark Blue Transmission Distance: 1.8
• PLA META Sunlu Teal Transmission Distance: 5.4
• PLA CC3D Lemon Yellow Transmission Distance: 8
• PLA BambuLab Basic Jade White Transmission Distance: 5

Swap Instructions:

• Start with Black
• At layer #18 (0.88mm) swap to Dark Blue
• At layer #21 (1mm) swap to Teal
• At layer #32 (1.44mm) swap to Lemon Yellow
• At layer #42 (1.84mm) swap to Jade White for the rest.

If you'd like to support me, you can now subscribe to a Thangs membership!

Joining will give you access to a private discord, all paid models, as well as a commercial license to sell the physical prints of my models!

If a Thangs Membership is not your thing, I also have a Patreon!