Papercut Mountaints - Dual Lithophane HueForge Print

This is a dual lithophane HueForge print - in which the print is BOTH a front-lit (normal HueForge print) and a back-lit (lithophane) print. I've been experimenting with this art style and I'm finding it so very lovely to convert my art into HueForge prints like this one.

It's a fairly easy print, but because of the contrast between the yellow of the sky and the darker hues of the foreground, it ends up being very striking and eye-catching. Looks great on a shelf!

As usual, the attached 3MF file will have all the necessary settings already loaded. If you do not use Bambu Studio, then you can load the STL and use the instructions below:

Print Instructions Print at 100% infill with a layer height of 0.04mm with a base layer of 0.2mm. If you wish to resize the print, please only adjust the X and Y axis, not the Z axis!

Filaments Used:

• PLA CC3D Lemon Yellow Transmission Distance: 6.8
• PLA Kingroon White Transmission Distance: 5.8
• PLA Flashforge Burnt Titanium Transmission Distance: 4
• PLA TECOR Light Blue Transmission Distance: 3.5
• PLA Kingroon Black Transmission Distance: 0.2

This print uses 5 unique filaments

Swap Instructions:

• Start with Lemon Yellow
• At layer #14 (0.72mm) swap to White
• At layer #23 (1.08mm) swap to Burnt Titanium
• At layer #32 (1.44mm) swap to Light Blue
• At layer #36 (1.6mm) swap to White
• At layer #42 (1.84mm) swap to Black for the rest.