By confirming your subscription, you allow Thangs to charge your card for this payment and future payments in accordance with their terms. You can always cancel your subscription.
House of Sky and Breath - HueForge Book Cover Print
A HueForged cover of the 2nd instalment of the Crescent City series by Sarah J Maas! Put it on your wall, display it on your shelves, all without having to find the room for an actual book.
Prints in about 5-6 hours on a Bambu P1P. The 3MF will have all settings already loaded for Bambu Studio. Otherwise, use the STL and the print instructions below :)
Print at 100% infill with a layer height of 0.04mm with a base layer of 0.2mm
Filaments Used:
PLA Kingroon Black Transmission Distance: 0.4
PLA+ Overture Dark Blue Transmission Distance: 4
PLA META Sunlu Teal Transmission Distance: 5.4
PLA Default White Transmission Distance: 5
PLA CC3D Lemon Yellow Transmission Distance: 8
Swap Instructions:
Start with Black
At layer #15 (0.76mm) swap to Dark Blue
At layer #19 (0.92mm) swap to Teal
At layer #27 (1.24mm) swap to White
-At layer #42 (1.84mm) swap to Lemon Yellow for the rest.
If you'd like to support me, you can now subscribe to a Thangs membership plan!
Joining will give you access to a private discord, all paid models, as well as a commercial license to sell the physical prints of my models.
If a Thangs Membership is not your thing, I also have a Patreon with the same perks!