For all the guitar lovers out here, here's a 3+ hour print that will fit into The Crafty Maker's Wall Mountable Frame :) This will fit into the 150mm x 210mm frame!

This print allows you to be creative, so naturally if you decide you want to use a different combination of colours for your own print, you totally should!

If you are using a Bambu printer and Bambu Studio, the included 3MF file will have all the settings applied to it (including a layer height modifier for the first 0.4mm of the print). Otherwise, you can download the STL and follow the instructions below:

Print Instructions: Print at 100% infill with a layer height of 0.04mm with a base layer of 0.2mm

Filaments Used:

• PLA Kingroon Black Transmission Distance: 0.4
• PLA MAX CC3D Grass Green Transmission Distance: 2.6
• PLA META Sunlu Teal Transmission Distance: 5.4
• PLA CC3D Lemon Yellow Transmission Distance: 8
• PLA CC3D Orange Transmission Distance: 7.4

Swap Instructions:

• Start with Black
• At layer #7 (0.44mm) swap to Grass Green
• At layer #14 (0.72mm) swap to Teal
• At layer #24 (1.12mm) swap to Lemon Yellow
• At layer #28 (1.28mm) swap to Orange for the rest.

If you'd like to support me, I now have a Patreon!

Joining will give you behind the scenes information on WIPs, access to a private discord, early access AND exclusive models!

If you want to sell any physical models I have uploaded anywhere, an unrestricted commercial license is available on the $10AUD tier of my Patreon!