For all you Dr. Who fans - it was recently the 17th anniversary of when the episode 'Blink' aired and it is one of my most favourite episodes of Dr. Who ever!!

Naturally I had to print something to commemorate it.

This print uses 5 filaments, but you can get away with 4 (ignore the beige). But I think the beige really adds to the sand-stone look of the statues, so if you have it, I would highly recommend it!

The 3MF will have all the necessary swaps included as well as a height range modifier to speed up the print for all Bambu Studio users. For non-Bambu users, the STL is there for those who want to use their own settings for the print, just follow the instructions below!

Print Instructions Print at 100% infill with a layer height of 0.04mm with a base layer of 0.2mm

The Model is 240x159.92mm in size You may print at higher layer heights below the Min Depth of 0.6mm

Filaments Used:

• PLA Kingroon Black Transmission Distance: 0.1
• PLA Chrominal Penumbra Gray Transmission Distance: 6.9
• PLA+ Sunlu Coffee Transmission Distance: 1.8
• PLA TECOR Beige Transmission Distance: 6.3
• PLA Kingroon White Transmission Distance: 5.8

This print uses 5 unique filaments

Swap Instructions:

• Start with Black
• At layer #12 (0.64mm) swap to Penumbra Gray
• At layer #20 (0.96mm) swap to Coffee
• At layer #23 (1.08mm) swap to Beige
• At layer #32 (1.44mm) swap to White for the rest.

Happy printing!