[Early Access] Metal Gear Solid - Hueforge Print

This print is an early access print for all Thangs membership subscribers. This will be publicly available at a later date to non-subscribers.

More retro gaming! Who doesn't love a good Snake (solid)?

This print uses 4 colours, 2 of them are white - with one being a high TD white and a second low TD white. So just be aware of that! If you don't have a high TD white, you can probably replace the 5.8 TD white with a gray.

The included 3MF will have all the swaps loaded in already for Bambu Studio users, while the STL is provided for those who do not use it. Just follow the instructions below:

Print at 100% infill with a layer height of 0.04mm with a base layer of 0.2mm

The Model is 240x160mm in size You may print at higher layer heights below the Min Depth of 0.4mm The Max Depth is 1.5mm and the Actual Depth is 1.4mm

Filaments Used:

• PLA Kingroon Black Transmission Distance: 0.4
• PLA Kingroon White Transmission Distance: 5.8
• PLA BambuLab Matte Dark Red Transmission Distance: 1.5
• PLA eSUn Cool White Transmission Distance: 2.7 This print uses 4 unique filaments

Swap Instructions:

• Start with Black
• At layer #16 (0.8mm) swap to White
• At layer #18 (0.88mm) swap to Dark Red
• At layer #25 (1.16mm) swap to Cool White for the rest.

If you'd like my work and would like to support me, you can now subscribe to a Thangs membership plan!

Joining will give you access to a private discord, all paid models, early access to some models as well as a commercial license to sell the physical prints of my models.