This is a really over engineered yarn reel holder.

It can carry up to 28 yarn reels.

It fits to the IKEA Skadis boards.

To mount it you need addional:
2x bearing 608Z
12x screw 2x8 

 

https://youtube.com/shorts/IpV2IbB3KYQ?feature=share

Skadis Yarn Reel Holder

Komplett.stl

Clip to hang glasses on the shelf. Shelf thickness <12mm.

Glasses holder clip

This a replacement for the bar switch of the Einhell TE-SW 18/610.

You can use the original screws and the cable gland.

It is made for switches with +/- 12mm diameter.

Use a 3.5mm drill to widen the holes for the original screws

I used this: 

https://www.conrad.de/de/p/tru-components-tc-r13-28b-01-r17-10-kippschalter-250-v-ac-10-a-2-x-ein-ein-rastend-1-st-1587823.html

Let me know your makes and/or your opinion.

Einhell TE-SW - New Switch 

Wallmount plug holder for TYP2 electric car plug.

Clean design without visible screws.

Plug is secured by a latch which can be released when taking.

https://youtube.com/shorts/7T6jFIytilg?feature=share

Additional material needed:
2x 5mm screws with dowel
2x M5 countersunk head screw
2x M5 thread inserts
1x spring


TYP2 plug holder

This is a wall mount housing for a RJ45 coupler.
26mm diameter. 

Coupler inlays:
https://amzn.to/3wgBSPD


Additionally needed:
1 step drill
    (https://amzn.to/3K2wRjk)
2 screws M3x30
   (https://amzn.to/3Kbmfib)
2 screws for plastic 2x8mm
   (https://amzn.to/3QWzQwa)

RJ45 wall mount coupler

Complete.stl

This is a additional support for the C-profile of the Hörmann garage door opener Liftronic 500.

The C-profile was moving up and down after installation. So I decided to support the profile with two clamps that can be screwed to the ceiling.

After installation the whole assembly looks way more stable.

Rail support - Hörmann Liftronic 500

Schienenstuetze komplett.stl

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like