This is the Cyber Spartan Headphone Holder and Sculpture! I gave you many choices with this one. The model can print split in half to minimize support usage or can print whole. I also included the version that doesn't have the slot on top of the head in case you just like the sculpture as is. At 100%, the split version fits on print beds at least 225mm in size. It can be scaled down to 90% and still fit a standard headset with no problem. Recommended print settings are below. Enjoy and happy printing!
3D printing settings Print Settings Recommendations for 0.4 nozzle: -3 walls -3% gyroid infill -When the model is split, the top does not need support, but the bottom does need minor supports for the ears and eye sockets. The support settings I use in Bambu Slicer (which should be similar to Cura or Orca Slicer are "Tree strong, On build plate only, Support critical regions only, Remove small overhangs" When you select these options, the supports are only on the ears and eyes, which is all that is truly needed.