Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:3146287.

Check out my youtube channel for 3D printing and 3D design videos! https://www.youtube.com/channel/UCuHuFfEPBPNv9AmoDYmXFiQ

Prepare to purge the unclean with a Bolt Gun from Warhammer 40k!

Designed with efficiency and 3D printing in mind, the entire thing prints as a single piece!

It is quite large, if your printer is too small you can either scale it down, or use meshmixer or another software to cut it up if you need to!

Check out my collection of Warhammer props!

Warhammer Omnisian Axe - https://www.thingiverse.com/thing:3213857
Warhammer Triple Laspistol - https://www.thingiverse.com/thing:3347377
Warhammer Laspistol - https://www.thingiverse.com/thing:3499538
Warhammer staff boltgun - https://www.thingiverse.com/thing:3329751
Warhammer Auspex Scanner - https://www.thingiverse.com/thing:3203711
Warhammer Hand Flamer - https://www.thingiverse.com/thing:3184107
Warhammer Bolt Gun - https://www.thingiverse.com/thing:3146287
Warhammer Bolter Round - https://www.thingiverse.com/thing:3146355
Warhammer Inquisitorial Rosette - https://www.thingiverse.com/thing:1175665
Warhammer Meltabomb - https://www.thingiverse.com/thing:3487900
Warhammer containment vessel - https://www.thingiverse.com/thing:3228986
Warhammer Medicae Combat Injector - https://www.thingiverse.com/thing:3230919



Warhammer Bolt Gun

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:3555393.

Check out my youtube channel for 3D printing and 3D design videos! https://www.youtube.com/channel/UCuHuFfEPBPNv9AmoDYmXFiQ

One of the most fearsome and powerful weapons of the Adeptus Astartes. The Chainsword uses adamantium teeth to shred armor and flesh and end a fight in a single attack. These massive weapons strike fear and terror into their enemies and can often stop a fight before it even begins. Standing almost 5 feet tall it is quite the weapon to behold. No mercy to those that meet its teeth...

Prints in 7 pieces, most of which dont need support (assuming you are using a large line width like 1mm with a large nozzle). Total print time of about 100 hrs. there is also a hole in the middle for a 1 1/4 inch dowel.

Also added a single piece version if you want to scale it down and print it as one piece

Check out my collection of Warhammer props!

Warhammer Chainsword - https://www.thingiverse.com/thing:3555393
Warhammer Omnisian Axe - https://www.thingiverse.com/thing:3213857
Warhammer Triple Laspistol - https://www.thingiverse.com/thing:3347377
Warhammer Laspistol - https://www.thingiverse.com/thing:3499538
Warhammer staff boltgun - https://www.thingiverse.com/thing:3329751
Warhammer Auspex Scanner - https://www.thingiverse.com/thing:3203711
Warhammer Hand Flamer - https://www.thingiverse.com/thing:3184107
Warhammer Bolt Gun - https://www.thingiverse.com/thing:3146287
Warhammer Bolter Round - https://www.thingiverse.com/thing:3146355
Warhammer Inquisitorial Rosette - https://www.thingiverse.com/thing:1175665
Warhammer Meltabomb - https://www.thingiverse.com/thing:3487900
Warhammer containment vessel - https://www.thingiverse.com/thing:3228986
Warhammer Medicae Combat Injector - https://www.thingiverse.com/thing:3230919

Warhammer 40k Chainsword 

chainsword_1_of_7.stl

chainsword_2_of_7.stl

chainsword_3_of_7.stl

chainsword_4_of_7.stl

chainsword_5_of_7.stl

chainsword_6_of_7.stl

chainsword_7_of_7.stl

Check out my youtube channel with videos on using the slicer software Cura, as well as Fusion360 for 3d design

https://www.youtube.com/@ASciencePotato 

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

asciencepotato

Achievements

Sapling

Up and Coming