This modular hydroponics tower lets you grow a large amount of plants without the need of  lots of room. Each module fits 3 50mm (2 inch) pots and has the water tube running up the middle. Just stack as many modules as you require. 

Each module is designed to fit 3 M3x4x5 heat-inserts and bolt together using M3 x 6mm bolts. 

I designed this to fit on a small 3D printer, with a build area required of 170 x 170.

At the bottom of the stack you need the Base with a 16mm barb fitting and the optional base clamp (to clamp to the other side of a container lid) and attach it to a submersible pump.

At the top you push in the shower head and bolt on the lid. I drilled out the holes of the top module to 4.5mm to fit in 3 heat-inserts to make this secure but it does function fine without the lid bolted down. 

Have fun growing!

Hydroponics Modular Tower

Hydroponics Module.stl

AT-AT kit card
Fully Articulated!!!! 2.5" tall

https://justaddfilament.com/free-atat-offer
(signup to our mailing list for product updates and the source files!)

Now with ANTLERS! :)

CC - BY NC SA

ATAT kit card 1 framed final.stl

**The cutest Opossum!!**

Print in place with no support and no assembly required. **Just slice and print!**
Feel free to scale them up or down as much as you want (the limit is your printer).
Pre-painted 3MF file also included!!

Check here for [Commercial License](https://www.mcgybeer.xyz/commercial-license)


Tbp

Models in this collection

Hydroponics Modular Tower

ATAT kit card 1 framed final.stl

Articulated Opossum