Hextraction Tile with Nothing

When nothing remains, everything is equally possible. Dump your hand with this simple utility tile for Hextraction, the hackable, 3D printable board game.

I developed this as an example of a self-explaining tile - you don't need a rules card if the rule is on the tile itself! Discarding your hand is a big deal in Magic, but in Hextraction, it just means you get to cycle in a new one at the end of your turn. The tile's bare-bones path means you'll always have a place to play it. Between us nerds, this one also lets you set up some "illegal" plays that connect the top edge to a top-side edge. Make sure the ball has some momentum!

Fusion 360 source: https://a360.co/42NcFKk

All of my Hextraction tiles have a built-in sacrificial support under each notch - remember to snap it off after printing. Enable the brim if these detach from the bed.

Hextraction is a 3D-printable, modder-friendly board game designed by me, Zack Freedman of Voidstar Lab. In addition to tiles, you'll also need 10mm steel balls or 3/8" slingshot ammo and a game board. To learn the rules and how to get started, watch the Hextraction video!

Hextraction is absolutely free - it's free of charge - all of my models are here on Thangs, commercial use allowed. It's free-form - you can play with any number of opponents, even zero. It's free to modify - you can create your own tiles and configure your own board.

For more information, visit https://playhextraction.com.