The wait is over, the CannaCaddy Classic is here. With only two more gridfinity spaces than the <a rel="noreferrer" href="https://than.gs/m/964213">CannaCaddy Compact</a>, this beast for your buds holds everything you need (and then some) to enjoy your weed.

 The wait is over, the CannaCaddy Classic is here. With only two more gridfinity spaces than the CannaCaddy Compact, this beast for your buds holds everything you need (and then some) to enjoy your weed.

The CannaCaddy Classic

The CannaCaddy Compact - A 2x2 gridfinity module designed specifically to hold your smoking tools.



I originally just wanted something to hold the bowl head while I packed it, and the idea evolved into holding lighters and carts and grinders, etc. Then, of course, I had to make it fit with the rest of my gridfinity setup.



The one shown in green in the pictures was printed using PETG, I had it in the printer and just ran with it, but I would suggest your normal PLA or preferred material.



I'm wrapping up the normal size (The CannaCaddy Classic) and the large size (The CannaCaddy Colossal), but for now, the CannaCaddy Compact can hold:



(1): Medium grinder slot. Average size grinder you see around, roughly 58mm diameter, nothing huge and not the smaller ones. Note: smaller/shorter grinders will be fine, the cutouts on the side make it easy to grab.

(1): Bic/Lighter slot. Slightly larger to accommodate the lighters with wraps.

(2): Vape cartridge/battery slots. Works well for storing your previous cart when you want to try the new one.

(1): 14mm bowl head slot. Works with the 14mm male portion of your (hopefully cleaner than mine) bowl head. Should sit in nicely, but you might have problems if the downstem bit is real long.

CannaCaddy Compact - Gridfinity Compliant Cannabis Supply Holder

CannaCaddy_Compact_Mk1.5.stl

The CannaCaddy Classic - A 2x3 gridfinity module designed specifically to hold your smoking tools.

I originally just wanted something to hold the bowl head while I packed it, and the idea evolved into holding lighters and carts and grinders, etc. Then, of course, I had to make it fit with the rest of my gridfinity setup.

Want something a bit smaller? Check out the [CannaCaddy Compact here.](https://than.gs/m/964213)

I'm wrapping up the large size (The CannaCaddy Colossal), but for now, the CannaCaddy Classic can hold:

(1): Medium grinder slot. Average size grinder you see around, roughly 58mm diameter, nothing huge and not the smaller ones. Note: smaller/shorter grinders will be fine, the cutouts on the side make it easy to grab.

(1): Rolling Paper slot. Fits the average 1-1/4 and the king size papers.

(2): USB slots. Ideal for the chargers for the average vape battery.

(2): Bic/Lighter slot. Slightly larger to accommodate the lighters with wraps.

(3): Vape cartridge/battery slots. Works well for storing your previous cart when you want to try the new one.

(1): 14mm bowl head slot. Works with the 14mm male portion of your bowl head. Should sit in nicely, but you might have problems if the downstem bit is real long.



CannaCaddy Classic - Gridfinity Compliant Cannabis Supply Holder

CannaCaddyClassicMk1.stl

This is a remix of the [Zandeelio](https://www.thingiverse.com/thing:6205939) skull bowl on Thingiverse.

I found a few variations on the original skull bowl, but none of them fit the application I wanted it for. Starting with the model I got from Zandeelio, I trimmed 2mm off the bottom for better stability and printability. I widened both X and Y while keeping Z around the same, trying not to throw proportions too much. I then wanted a low-poly look, but not as extreme as possible, so I went with somewhere around 4-5k triangles to get the MID-poly look.

As it is now, I can keep 3-4 bananas, a couple apples and a few clementines. If you want to hold more fruit, I'd say increase the height of the model a bit more or maybe flare the brim of the skull more outwards.

Semi-LowPoly Skull Bowl

Semi_LowPoly_Real_Wide_Skull_Bowl.stl

Semi_LowPoly_Real_Wide_Skull_Bowl.3mf

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

WeirdPrintsPgh

Designer posts

The CannaCaddy Classic