We've been playing with this fortune telling fidget for days on end. 

Six possible responses for your fortune, but we also just like to play and spin the dice.

Print it in your favorite colors, or mimic the magic 8 ball that inspired it. Entirely print-in-place.

Make sure your adhesion is dialed in, and clean your plate with IPA beforehand, but this is an easy print! Not much else required. 

Gently remove from plate when finished. We recommend flexing the plate rather than pulling. 

Layer Height - .15mm 

Nozzle - .4mm

Infill - We like 10%. It only affects the weight of the ball, so feel free to try lighter or heavier and see what happens. 

*Free for personal use only

View more models from our whimsical world here: https://thangs.com/designer/TwirlygrlandMom/collection/Whimsical%20World%20of%20Twirly%20Grl-40066 

Post your make and show us how it turned out!

The Amazing Fortune-Telling Fidget Ball By TwirlyGrl

The Amazing Fortune-Telling Fidget Ball By TwirlyGrl.stl

Fun dangling earrings with a two-tone daisy chain for each ear. Utilize filament changes for color change. 

Try these with a matte on the bottom and a silk for the centers!

Size up or down but watch the size of the post hole. We included two files, so you can frame your face. Print one for each ear. 

You can also make a necklace or pendant for other forms of jewelry. 

For the findings to make earrings or necklaces:

We like this set of hypoallergenic hooks and jump rings from Amazon: https://amzn.to/3VOPkYB

I like to print at ..15 layer height, with the printer slowed down a bit for the top layer. 

Clean plate with IPA in between prints for better adhesion. 

Wait until fully cooled to remove from plate. 

View our other nature inspired models here: https://www.printables.com/@TwirlygrlandMom/collections/1370017 

Daisy Chain Dangling Earrings - Easy two-tone with filament change. Brown-eyed susans, flowers, wild

daisy chain left.stl

daisy chain right.stl

Magnetic butterfly wing jewelry concepted by my daughter--so we could have a matching set, to create a butterfly between us. 

See the pictures for her original sketch!

Hidden magnets in the print create a kissing effect attaching the wings together. 

Program a filament change at 3.0 for color change and a pause at 2.4 to drop the magnet in. 

Utilizes a 4x2mm rare earth magnet in each. We use these https://amzn.to/3xvaKQv

Pay attention to polarity so the wings kiss instead of repel. 

You can make a necklace or keychain, as well as other other forms of jewelry using jump rings. The holes for the rings are already in the model. 

For the findings to make keychains or necklaces:

We like this set of hypoallergenic jump rings and findings from Amazon: https://amzn.to/3VOPkYB

Here is a link to necklace chains if you need it: https://amzn.to/3vREu9y

 
*Free for personal use only

Enable ironing for a smoother finish. 

I like to print at .2 layer height with speed slowed to about 65% of my normal run speed, slowing it down to 50% for the top details in the second color. 

Clean plate with IPA in between prints for better adhesion. 

Wait until fully cooled to remove from plate.

View our other nature inspired models here: https://www.printables.com/@TwirlygrlandMom/collections/1370017 

Magnetic Connecting Butterfly Wings - Hidden magnet kissing butterfly wing pendants. Two colors 

butterfly pendant right(1).stl

butterfly pendant left(1).stl

Fun dangling flip flop earrings with a multi-color print utilizing filament changes. 

Excited to see what color combinations you choose!

Size up or down but watch the size of the post hole. Feel free to download the stl and flip one to make a matching set. 

You can also make a necklace or pendant for other forms of jewelry. 

For the findings to make earrings or necklaces:

We like this set of hypoallergenic hooks and jump rings from Amazon: https://amzn.to/3VOPkYB

I like to print at .15 layer height, with the printer slowed down a bit for the top layers. 

Clean plate with IPA in between prints for better adhesion. 

Wait until fully cooled to remove from plate. REALLY. REALLY. And be very careful when removing this one.

*Free for personal use only 

View more models from our whimsical world here: https://www.printables.com/@TwirlygrlandMom/collections/1370058 

Flip Flop Sandal Summer Earring Set - Easy filament change two-tone design

final flip flop earring(1)(1).stl

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow