tracking pixel
Jacob P

The Three Pillars of the Jedi

by
ThinAir3D
Follow
Follow
Remix Model
ThinAir3D
ThinAir3D
Image 1 of 6
The Three Pillars of the Jedi 3d model
2D
3D
Makes
The Three Pillars of the Jedi 3d model
The Three Pillars of the Jedi 3d model
The Three Pillars of the Jedi 3d model
The Three Pillars of the Jedi 3d model
The Three Pillars of the Jedi 3d model
The Three Pillars of the Jedi 3d model
8 Likes31 DownloadsMarch 6, 2022


Just print flat on the back how they are already oriented, no supporst needed. There is a keyhole slot on the back so they can be hung up, or displayed on a desk.

Printing, Assembly & Post Processing

  • Already oriented how they need to be to print. Just print flat on the back, no supports needed.

FDM or Resin: FDM, or large format resin. Scaling: Current size is 72 x 134 x 20.
Supports: No supports Nozzle Size I Used: 0.4 Infill/Perimeters: I used 10% with 2 perimeters. They are only decorative so you could probably use less. Layer Height: I used 0.20 and they came out great. You should be able to use a higher layer height with no difference.

**This design is uploaded with a non-commercial license. Purchasing this file does not grant you the rights to sell commercially.

If you would like to consider gaining access to ALL of the models and the rights to print and sell, you can check out my Patreon at https://www.patreon.com/thinair3D


8 Likes31 DownloadsMarch 6, 2022




8 Likes31 DownloadsMarch 6, 2022