• Support-free phone stand with a gear mechanism for adjusting the tilt of your device.
• No adhesive or external hardware needed for assembly (100% 3d printed).
• 2 different versions of the sleigh seat; one for single color and one for multi-color.
• Individual STL's and pre-colored 3mf's included

Printing Info **These are just the settings I used to test the model, feel free to use whatever settings work best for you. FDM or Resin: FDM Scaling: Can be scaled up. Scaling down may cause issues with the threaded parts/snaps/gears. Supports: None Infill/Perimeters: 10-15% infill + 2 wall loops Nozzle Size: 0.4 Layer Height: 0.2 Print Time: Approx 5 hours 3 mins (Bambu X1C) Filament Usage: Approx 150 grams (Bambu X1C)

Printing Info

1. No Supports Needed. Print all pieces in the orientation that they import in and assemble according to the assembly instructions below.
2. I have included a folder with the individual STL's, but there is also a folder containing a few 3mf files***
3. There is a multi-color option for the seat that has already been colored for you, just import geometry only.
4. There are also 2 pre-sliced 3mfs for Bambu Slicer, one with all of the files for single color and a pre-colored one with all of the files for multicolor printing.

***These 3mf files were created and sliced in Bambu Slicer because that is the only brand of printer I own. They were sliced with mostly stock settings, but keep in mind I make mistakes. Please check over your slicer settings before printing if using one of the 3mf files.