**non-commercial use only**

This print is best used on a multicolor printer, like a Bambu with an AMS unit! The words will not work otherwise. 

Hi Bestie!

I designed this for my best friends for Galentine's Day, and thought others would love printing up this adorable little container, too!

It's best printed on a Textured plate as it's facedown. 

It requires two colors of filament -  The lid is printed face down, with the design flush with the lid!  if printed without a second color, you'll just have a cute single color heart container.

Happy printing!



Hi Bestie! heart shaped box container for Bambu w AMS

HiBestieHeartBoxStripedLarge.3mf

**Non-Commercial Use Only!**

I designed a little crochet hook holder for my desk! I needed a little thing to store a couple of hooks, needles and stitch markers so that I didn't have to carry them all over the place, and came up with this. It holds up to an H size Boye hook in it's printed size, although if you move the drawer to a second plate you could likely print it large enough for the larger sizes.

The drawer is large enough to accomodate a few needles, stitch markers and has room for a hook you don't want to display.

If you're like me and keep collecting Woobles hooks, this is also a great way to display them all! :)

This was originally designed for a Bambu X1C printer with AMS, but the design is raised so that it can be printed in single color and you can paint the design on, and paint the recessed area on the drawer if you wish. 

I usually print in either black PLA, or the Amolen ebony wood filament, which works very nicely. 

Happy printing, merry crocheting, and post photos if you wind up printing one. I love to see what people print!

Crochet Hook Display with Drawer

CrochetHookHolder.stl

**Non-commercial use only!!**

Na-na-na-na-na-na-na-na, BAT CHAAARMS!

I made some cute little bat wings (that depending on color, would also be fantastic dragon wings!) for my Doc Martens. They'll fit on any lace up shoe or boot with 3 eyelets.

These work best with a Bambu Printer with an AMS, but can be printed in a single color as well. The ones shown are printed with Bambu Black PLA and Flashforge Nebula Purple for the inside of the wings, and printed them on a texture PEI plate.

Bat (or Dragon!) Wing Charms for Boots

BootBatWings.stl

We got a set of the Phillips Hue Signe lights, but the bases aren't super stable on carpet. I designed this super quickly in NomadSculpt to make the lights less likely to tip over. It's a wide base that the light sits in, with a cut out slot for the cord. Nothing fancy, but it does the trick! 

It's designed for a filament printer, and I printed it in just regular black PLA with 4 walls to make it strong. 

As a nice bonus, it makes it so both of your lights are equidistant from the wall :)

Philips Hue Light Signe Floor Base stabilizer

HueSigneBase (1).stl

"It's just you and me as we garden ‘round the world, it’s just you and me Punk Rock Girl!"

I wanted to make a little planter for myself and couldn't find one with a pyramid stud pattern that I liked, so I made my own!
It has a hole for drainage, and a matching base plate that it drains in to.
 It prints up beautifully in the shiny silk filaments, as the studs catch the light really nicely. It also scales up or down really well!
If using outdoors, I'd recommend PETG, but for indoors, PLA is fine. 

Punk rock Pyramid Stud Planter pot with drainage

PyramidPlanter.stl

Hey hey! I am a 3D printing enthusiast who is slowly building up a library here after having all my stuff scattered around on Makerworld, Cults3D and Thingiverse. This seems like a nice hub to host all my fun stuff, and eventually offer a commercial license for things, if there's any demand for it :) Thanks for following! &lt;3 Megan, aka Ghostgirl

 Hey hey!  I am a 3D printing enthusiast who is slowly building up a library here after having all my stuff scattered around on Makerworld, Cults3D and Thingiverse. This seems like a nice hub to host all my fun stuff, and eventually offer a commercial license for things, if there's any demand for it

Hi everyone! 

A vintage styled garden sign that says Bigfoot Crossing! This is modeled after the old Bunny Crossing signs you would see in little flower gardens.
I designed this for filament printers.
Important!!! Print with supports - there's an edge that gives a cantilever warning, and while technically you can print without support, you risk it losing adhesion near that edge.

For best results, print this with supports with PETG filament, so that it won't melt in the sun. If you're using it in houseplants, PLA is fine!

I've included a single color 3mf file for Bambu users.

To get the same visual look as my model, use a copper metallic Sharpie pen, and gently rub it over the model to highlight the raised areas. Then color in their cute little faces to highlight the cutouts!

I don't allow Commercial use of my files, if you would like a Commercial license for this file, please contact me, and we'll work something out! :) 

Bigfoot Crossing Garden Sign Stake

BigfootGardenStake01.stl

BigfootGardenMarker.3mf

PyramidPlanterBase.stl

PyramidPlanterwithBase.3mf

BootBatWings.3mf

Video game dev who likes to 3D print stuff.

Secretly 8 bats in a trench coat.

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

TheGhostgirl

Achievements

Seedling

Designer posts

Hi everyone!

Pinned models

Bigfoot Crossing Garden Sign Stake

Punk rock Pyramid Stud Planter pot with drainage

Bat (or Dragon!) Wing Charms for Boots

Hi Bestie! heart shaped box container for Bambu w AMS

Crochet Hook Display with Drawer

Bat (or Dragon!) Wing Charms for Boots

Philips Hue Light Signe Floor Base stabilizer

Punk rock Pyramid Stud Planter pot with drainage