Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:6082496.

Just a smal logo showing De Kuip in Rotterdam.
Made this for a friend to glue onto an outside thermometer.

My other Feyenoord designs.
Large Feyenoord championship sign: https://www.thingiverse.com/thing:5990693
Feyenoord Logo: https://www.thingiverse.com/thing:5755465


Feyenoord Rotterdam - De Kuip

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5753710.

**Guaranteed design:** All my designs I printed on my Ender 3 v2 Neo and use myself.
- - -
**25-04-2023: Updated version V4**
Now all holders are exactly the same format and height and fit together even better.

Why this Remix:
Improvements: Faster prints, Less filament, Smaller height, Better fit.
With the original version I had to use a hammer to click them together. Now it fits better. Battery's wil absolutely not fall out because of the lower height.

I used several Remixes from different sources. So therefore posted here as new design.
Still of course a big thank you to the original designers.

Improved Modular Battery Holders V4

AA-Holder_v4.stl

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5987629.

**Guaranteed working design:** All my designs I printed on my Ender 3 v2 Neo and use myself.
- - -
UPDATE V3 (25-04-2023):
A 2 color version and 3 color version is now included.
Also a better layer count for strength and time/filament savings.

A Dog (German Shepherd) warning Sign for your garden, front or back door to keep the door closed and unwanted persons out.
The bottom has many layers, so sign won't bend or break when mounting on a uneven brick wall.

Sign can be printed in multi colors with Prusa Slicer. See photo #2 and #3 for example.

Dog (German Shepherd) Entry Warning Sign

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5990667.

**Guaranteed working design:** All my designs I printed on my Ender 3 v2 Neo and use myself.
- - -
Text is in Dutch.
On request I can make an English version. Just leave a comment at this design.

A 2 color version and 3 color version is included.

A Dog (German Shepherd) warning Sign to keep unwanted persons out.

Sign can be printed in multi colors with Prusa Slicer. See photo #2 and #3 for examples.

NLD Dog (German Shepherd) Protect your balls Warning Sign

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5666367.

**Guaranteed design:** All my designs I printed on my Ender 3 v2 Neo and use myself.
- - -

This is an Improved stronger thick walls version.

The original had very thin flimsy walls and ceilings and would fall apart when using.
This RE-mix has much better thicker walls and won't break.

Tip: Use a bit of unused filament for the hinges. Melt the ends to hold it in place.

Design is not perfect. The corners can be improved.
But it's functional and working perfectly.
Covers close tight and wil not open by accident.

When printed as displayed all support will be inside the covers, so ugly leftover support material will be invisible when holder is closed.

Stronger improved Dog Poop Bag + Snack Box (Holder) without Clip

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5933510.

Just a sign a made for my own dog to put on his bench.


Dog Name Sign

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5990693.

**Guaranteed design:** All my designs I printed on my Ender 3 v2 Neo and use myself.
- - -

Size: 18x22cm

Just a nice looking Feyenoord sign to hang in your home, garage, garden... etc.

There are 5 Color Layer levels you can use.
See example photo for exact color layer change.

Tip: Using PrusaSlicer makes it real easy to add automatic color changes.

Feyenoord Champion sign 2022-2023

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5854514.

This is a complete rebuild on a existing design.
The original had so many flaws that I decided to completely start over.
Still kudos for original designer: https://www.thingiverse.com/thing:4530460 

This design has 1 power Cable, 3 Charge stations, holders for 5 brushes.
This design does not need Glue (original did) and can be screwed together by using M4 inserts.

Improved:
No more Glue needed - M4 Bolts & Nuts inserts design added - Backplate integrated in design - Intermediate plate improved - Holders design improved - Bottom design improved.

What you need:
- 3x M4 bolts (+/- 25mm).
- 3x M4 inserts.
- 3D printer ;)

Assembly (See https://www.thingiverse.com/thing:5854514 Post Print pictures):

> Insert 3x M4 inserts into the Top part.

*** WARNING: Electricity is dangerous! Only do this if you know what you're doing! 

1. Unplug all charges from power!!!
2. Cut cords from all 3 chargers.
3. Pull 1 wall plug cord through the hole on the side (bottom part).
4. Connect this wall plug cord to all 3 charges inside the bottom.
5. Hide cable that is to long in the bottom part.
6. Place intermediate plate on the bottom.
7. Put 3 charges in place on the intermediate plate.
8. Put Top cover on and Screw tight with 3 bolts.

Tip: step 4.. Solder and use shrink tubing so the electric connection is good.

Oral-B Multiple Charger & Holder.

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5854334.

Remixed the base.
Shot glasses will stay firm in place while carrying the dispenser.
Now you can fill the shots and serve them while carrying.

Included the (fixed) original Top part.

Thanks to the original Kraken shots designer.

The hole for glass is 32mm.
If you want a different size for smaller or larger glasses, just let me know.


Shots dispenser Kraken - Remix

Remix_Kraken_shots_Stand_V2.stl

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5617935.

Extra Axis movement and Leds holder.

For the rest of connectors visit the original at https://www.thingiverse.com/thing:3095730 

The last Arm is remade so it can connect to the extra 90 degrees Joint.
New extra 90 degrees rotated Joint to create extra axis movement.

Print:
Make the parts that hold the bolts strong!!! 
Do not just use infill, but create more external perimeter layers that will make it strong!

Build:
Use this XL ARM to connect to the included 90 degrees Joint.
Use this included Joint to connect XL Arm to Led-Cam holder.
Same M5 bolts/nuts can be used as original design.
I left a opening in the middle for the wiring for the leds to the back of the frame.

Leds:
2812B RGB 5V. Connected to Wemos D1 / Wled > 24-5V regulator > Ender Powersupply.
Challenge was to connect the corners. I used 3 tiny wires and soldered.
But there are 90 Led hook connectors available on Alie if you don't want to solder.
My leds did not have the glue on the back (used leds), so i used hot glue (ugly i know ;))..
D1 board has limited power, so do not attach to many leds directly to the D1 board.

Tip... In Octoprint, Install Wled addon.

Want to know more or need help? Just ask...


Camera Arm with Leds holder and Improved movements

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5614696.

I didn't like the original that has Santa's bag on top of the sled, so bye bye Bag ;)

Tip: In PrusaSlicer it's real easy to create 2 color layers (see picture).


Santa Sleigh with reindeers

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5666367.

This is an Improved stronger thick walls version.

The original had very thin flimsy walls and ceilings and would fall apart when using.
This RE-mix has much better thicker walls and won't break.

Tip: Use a bit of unused filament for the hinges. Melt the ends to hold it in place.

Design is not perfect. The corners can be improved.
But it's functional and working perfectly.
Covers close tight and wil not open by accident.

When printed as displayed all support will be inside the covers, so ugly leftover support material will be invisible when holder is closed.

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5530396.

This remix was made because I needed space for a right drawer (or front power button).
Thanx mrmt32 (https://www.thingiverse.com/mrmt32) for the original version!

With this remix I still have room for an optional drawer on the right side. 

For right side optional drawer see: https://www.thingiverse.com/thing:5138213 
or https://www.thingiverse.com/thing:5138213

Printed and fitted on my Ender 3 V2 Neo.

Ender 3 v2 Raspberry pi drawer

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5729470.

Added some extra ventilation holes on the side.


Quinled Dig Uno Case with extra ventilation.

First a big thanks to the original designers.

Remix info:
The original base did NOT fit on my Ender 3 V2 Neo plate (235.95mm). And it was a huge ugly thing ;)

This remixed base is much smaller.
The fit is real tight so the base wont come loose! I printed it myself and it does fit 100%

Also included is a resized Silhouette (94%), so it will fit this remixed base .

Note: Black bar right below is NOT in design!
I just blocked some personal text I printed for my wife (yes this is a perfect present for Elvis fans ;-))

Extra bonus;
1. Print time and Filament usage is extreem much shorter than original.
2. Included a resized Silhouette version with Music Note/Hart for those who like it.

Elvis Presley Silhouette Stand Remix

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5755465.

Someone posted this logo but it was completely useless. It had wrong layers count, and to thick layers that made it impossible to print correctly with all needed colors.

So I made this new one (99% rebuild).

Don't post comments about "your club", it's just a logo ;)

Please leave a comment if you need help or when you like this logo.

Original size xyz: +/- 100 x 100 X 3.85 mm

Colors when printed at 0.2mm Layer height:
0.0: Gold
1.0: Black
1.8: Gold
2.6: White
3.4: Red

Also see photo for correct Color Change Layers (when printed at 0.2mm Layer height)


Feyenoord Rotterdam 3D Logo - v2

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5753537.

Remix Info:
=========
Added 2 small notches on the inside so Clip fits tighter around the spool and will click behind the bevelled edge of the spools.
Some spools have bevelled edges inside, and some have it on the outside, this clip will click behind either edge for a better fit. And for spools without bevelled edge this enhanced clip will also be a lot tighter because of the 2 small notches inside so it wont come loose so fast.

Thanks to the original designer for sharing!

Improved Awesome Filament Clips

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5550906.

Holder for 3 most used tools.
Easy assembly, just click in place without needing to unscrew anything.

Why this remix?:
I have 3 Tools I always need but I could not find a smal tool holder for all 3 together.
So this remix can hold the Spatula, Wire cutters, and Tweezers.

On my Ender 3 v2 Neo it fits left and right, front and back.

Ender 3 Pro: Watch out for the height! You need extra dampening feet or shorten this holder.

Another Tool Holder for Ender 3 v2 (Neo)

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5729168.

Clips to attach top part of shutters.

I found many variations online, but none of them fitted.
These clips are for shutters bought at Kwantum shop in NLD.

First I printed some with PLA+, and that works.
But PETG would be slightly better because it's stronger and wont bend when it needs removing.


Shutters top clip (brand Kwantum)

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

The Duke Sr

Feyenoord Rotterdam - De Kuip

Improved Modular Battery Holders V4

Dog (German Shepherd) Entry Warning Sign

NLD Dog (German Shepherd) Protect your balls Warning Sign

Stronger improved Dog Poop Bag + Snack Box (Holder) without Clip

Dog Name Sign

Feyenoord Champion sign 2022-2023

Oral-B Multiple Charger & Holder.

Shots dispenser Kraken - Remix

Camera Arm with Leds holder and Improved movements

Santa Sleigh with reindeers

Stronger improved Dog Poop Bag + Snack Box (Holder) without Clip

Ender 3 v2 Raspberry pi drawer

Quinled Dig Uno Case with extra ventilation.

Elvis Presley Silhouette Stand Remix

Feyenoord Rotterdam 3D Logo - v2

Improved Awesome Filament Clips

Another Tool Holder for Ender 3 v2 (Neo)

Shutters top clip (brand Kwantum)