3D MODEL DESCRIPTION I hope you enjoy this light up Deku Shield from Zelda. I made the symbol in the middle separate with enough space to run lights so it can light up. The battery pack fits in the back. I've included a version for room with and without a 3AA battery pack. The version with room for a batter pack has a cover held on by 8 small 1/8"x1/16" magnets.

The main part of the shield is split up into 4 large pieces. I've included printable dowels to help hold the pieces together. I recommend also using a strong glue and plastic welding.

You will want to add a leather strap separately.

Some warping can occur during the printing process and make the large symbol in the middle of the shield a pretty tight fit. If necessary, slowly heat the symbol with a heat gun or hair dryer and bend and make slight adjustments until it pops into place.

This shield can be built left handed or right handed by easily swapping the handle and leather strap holders.

This will fit on an ender 3 pro or larger size printer.

Feel free to check out my tiktok StephsNerdyStuff to see me build this.

Found on amazon: Magnets: https://a.co/d/7RIL3Wl Lights: https://a.co/d/0REP3Yv

3D PRINTING SETTINGS I printed this with 8% Gyroid infill with tree supports.