Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:2758534.

Technically, it was directly derived from the original (https://www.thingiverse.com/thing:2533058) , but this one gave me the idea.  I removed the center shaft altogether to make the pockets as deep as possible.  Then used some of the leftover volume in the top to create a pocket that can fit a couple of extra pills.

For the cover, I cut off the sharp tips to make it a tad less painful to use.  :)

31 Day Spiral Pill Box (deeper pockets with bonus pocket)

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4800445.

I love the OpenForge Watchtower, and immediately thought how cool it would be as a dice tower.

So I created this as one piece to print at once.  Scaled to 200mm height.

The steps and column of my added interior are smooth, but maybe one day I'll figure out how to do a cool carved stone look, like on the original.

OpenForge - Dwarven Watchdicetower

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:696551.

I needed to find a place for my Pi, so I took the base of the spool holder and fused in a Raspberry Pi (B+/2) sleeve to make an easy to use, removable home for the Raspberry Pi.  I use this with OctoPrint (and occasionally AstroPrint)  

I printed with 40% infill and 3 perimeters, but I think six might be better.  

Included the endocarp file from the original sleeve at http://www.thingiverse.com/thing:681899

Robo3D Raspberry Pi B+/2 Mount

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4272683.

I took the excellent wheel from Lammesky, cut the back off to make it print more easily, and added an extender for putting it past the parts cooling fan.  Glue in a 8x3 magnet in the larger end, and it will hold onto the extruder end.

I made it because I thought of my old Jungle Cruise skipper days, spinning the wheel like I was really piloting the thing.  Sometimes spinning it opposite to see if anyone was paying attention.  lol

https://youtu.be/KKN8EMA4pW4

Extruder Jungle Cruise Wheel

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4179765.

I liked RedWagon's design for card holder, but I want to add to it and account for the specialty cards.  I also wanted to organize the bullet holes so that it would be per person, so it has 8 rows of 4, plus two extra spots for the sheriff's extra bullet and one more.

The separate card holder should be printed upward with the back to the bottom.  This will still require supports, but just to support the side walls.  I may redesign that to make printing a little easier, but it work pretty well.

Bang Box Organizer

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4180679.

I have my Prusa i3 MK3S in an IKEA Stuva Enclosure with the filament in a bin on top.  I wanted to create a nicer passthru for the filament to create a clean look, and to support two spools.

Designed in two pieces to screw together from either side.  The lower piece accommodates two PC4-M10 Straight Pneumatic Fittings. (what i bought: https://www.amazon.com/gp/product/B07NXQT75Y/ref=as_li_ss_tl?ie=UTF8&psc=1&linkCode=sl1&tag=theharfam08-20&linkId=055fceaff11402e3d8252af15597de4d&language=en_US)



Enclosure Pass Through

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:2590784.

I created this to hang my Playstation VR Aim Controller from a cabinet door.  Most existing models available are for a horizontal position, which wouldn't fit my door.  This will allow the controller to hang from the bottom rear corner without strain.

There is a hole for a screw, but I just hung mine with 3M command strips.

This can be printed as is, without supports.

Aim Controller Hanger

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4711591.

This is to use with @Jacaeiro's excellent RPi 4B case.  The standoffs screw into the back of the front part.  With long enough screws, probably can use the back, but I chose to leave it off for additional air flow (and since I wouldn't really see it).

I used Gorilla Tape to secure this to my cabinet.  That stuff is very strong.

Since it sags a little because of play in the hinge, I included a little 'ledge' I used to help keep it more level when it's in place in front of my cabinet door.

Hinge and Standoffs for Raspberry Touchscreen Case RPI 4B

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4778182.

I bought Wyze Thermostats, but found that they were created for vertical mounting.  This makes them not usable with older Honeywell horizontal thermostat mounting.  While you could just create new holes and such, I decided to make my own to use the existing mounting screw locations, and cover (mostly) the old thermostat's footprint.  Didn't quite cover the paint gaps left by my old thermostats, but this worked out well enough.

I created this in two parts, so that the base could be screwed to the wall, and the cover hides the screws underneath.

I've included the Fusion360 file in case anyone wants to edit it to fit their particular situation.

Wyze Thermostat Horizontal Mount

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4643014.

A wall mount for the TP-Link Deco X20 wifi router node.  Opening to see the status light, node information on the bottom, and room for cable connections.

TP-Link Deco X20 Wall Holder

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:2700978.

I designed this to protect the positive terminal connector, as the stock Honda one wouldn't cover the replacement.  Slots to use a wire-tie to help keep it on.  Vents in the top of the cover to help keep heat (if any) from getting trapped underneath.

Print in ABS or Nylon to handle the heat.

This is the terminal connector that I used:  https://www.autozone.com/batteries-starting-and-charging/battery-terminal-end-and-adapter/duralast-battery-terminal-end-and-adapter/374187_0_0



Duralast Battery Terminal End Cover

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4642343.

11/6 - Updated to move the upper right tab from outside to inside.  That way if you print the change compartment in a different color, it won't be interrupted by the tab from the base.

I like the wallet but generally don't want to glue or screw pieces together.  I've added three tabs on the base and matching spots on the compartment to lock into.  The lid has two tabs that lock into the lever for a good fit.  Results will vary based on how tuned your printer is, of course.

This has a slightly thicker lid, based on the f3d files, which I like better.

Smart Wallet - Snap-fit Sliding 3D printed wallet

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:2630885.

I wanted the AAA Battery Mag floor plate and spring base to be like the modified one for the AA magazine by ArkosSAhn: require no screw.  I also matched up the hole and plug size to match the other.

Updated Floor Plate and Spring Base for AAA Battery Magazine

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:1879689.

I adapted the original, great design to fit a different LED name badge that I liked a little better.  I also made it into a desk-standing sign for my Mom to have and enjoy.

The buttons worked somewhat well, but I didn't spend a lot of time tweaking them.

[name tag](http://www.amazon.com/gp/product/B00ENNWHPQ/ref=as_li_tl?ie=UTF8&camp=1789&creative=390957&creativeASIN=B00ENNWHPQ&linkCode=as2&tag=theharfam08-20&linkId=KGL6IIBIXVDBQKB3) from Amazon.  I posted a [video](https://youtu.be/xkwT3S4ilHY) of it in action on Youtube.  

Wrigley Field Marquee Standing Sign

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4654439.

I liked both versions of David Navida's [Elite Strap](https://www.thingiverse.com/thing:4630780), but the the plastic snagged on the fabric of my standard strap.  
I pulled out the tabs, including the center guides, and added loops.  

Use velcro, wire ties, or whatever through the loops to help keep this attached to the strap.  

I took out the middle guides as my big head needs the most strap width, so now it's fully adjustable.

Quest 2 Elite Strap Head Piece

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4643969.

The IKEA Samla clips are great for keeping the bin closed.  I got tired of putting them down and dropping or losing them, so I've added a multi-link hinge with an end that can be adhered to the bin side.



Best Samla Clip for 45-65L with hinges

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:1262678.

I made this to house a time/temp/voltage module that I bought off eBay.  It is meant to sit in the back corner of the R1, with excess cable tucked underneath.

This module should fit: https://www.amazon.com/Yeeco-Voltmeter--67-257%C2%B0F-Electronic-Waterproof/dp/B013Y4REIY/ref=as_li_ss_tl?ie=UTF8&qid=1452615271&sr=8-2&keywords=Green+LED+3+wire+Digital+Time+Temperature+Voltmeter+Panel&linkCode=sl1&tag=theharfam08-20&linkId=a27df3786e15f7d61a2d34d0b616fead 
![Yeeco 3in1 3-Wire](http://ecx.images-amazon.com/images/I/61kQ%2Bk0eRsL._SY679_.jpg "Yeeco 3in1 3-Wire")

Here's out it looks during my timelapses: https://www.youtube.com/watch?v=Q9rj_2LBn5E&index=10&list=PLx1Ra3aaO0TTxrMdf3hoAEnkolzrt1LmN

Temp Mount for Robo3D R1

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4179941.

I needed to pass a power cable into a plastic bin, so I created this passthrough that has an inner and outer section that screw together, so no hardware.  Did not need environment-tight, so created with a 20mm (just over 3/4") diameter opening.  Intended for a bin with ~.5mm thickness wall.

Plastic Bin Pass Thru

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4539584.

I didn't want to use metal screws, and prefer to print it complete, so I redrew this to include its own screw.  Large enough to hold firmly on a desk.

UPDATE (7/11 10:25):  Found that the screw .STL had some errors, so now fixed.

Desk Cable Clip with Screw

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:760093.

UPDATE 2016-03-12 - I renamed the 2nd version of the small gear, which has the larger shaft hole to "Herringbone_Gears_-_Small_v2.stl" to clear things up a bit.
I've also added "Herringbone_Gears_-_Small_v3.stl" which tightens the hole up by about .15 mm to make a closer fit.

UPDATE 2016-03-09 - I've included a v2 SCAD file and small gear with widened shaft hole (still for dual flat shaft) that should make fitting easier.

UPDATE 2015-04-22 - I've updated this by enlarging the teeth on the large gear just a tad to prevent the gears from stalling on each other.  This version is working very well for me.  

I took the SCAD files and adjusted them to match dimensions from the stock, injection-molded gears that come with the R!.  

If you print these, please let me know how it turns out for you and if you feel that they need to be modified.  I am aiming for a drop-in replacement for the stock parts.  

This is for my R1 that has a dual-flat shaft on the extruder stepper.  

http://youtu.be/u0iM2vLcumE

Herringbone Gears for Robo3D R1

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4741374.

I wanted to do a filament swap to create the side decorative pieces, so I sliced it up and made the "GripReceiverSidePlate_Engraved" pieces into a top and bottom.  I didn't make a left and right, as I just used the 'nut' side for both, since there was enough clearance for the screw I was using.

Added a version of the DerringerReceiver, adding the engraving to the magnet version, and slicing out the sides so they can be printed separately and/or modified as desired.

DDD Crossbow Pistol Decoration Split

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4531494.

I loved the simplicity of JDM755's Bearing Spool Holder.  I felt like making something a little extra, so decided on this. The rollers are straight from his design, and needs four 608 bearings that go inside the ends.  

Nice thing is it works for my 2.5KG 100mm wide roll from IC3D.com as well as the more normal sizes.


Bat Spool Holder

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:2011130.

This is an OpenSCAD version of Tanatof's Spool drawer organizer, created to make it adjustable to different spool sizes. 

Still working on refinements, so please let me know if the range of size values is too constrictive for your spools.

Still have some other features I want to do, like rounded corners, and a few others.

UPDATE: 2016-01-03 - Added a parameter where you choose to render one drawer or all of the drawers.

UPDATE 2016-01-08 - Thanks for the feedback, esp. from C. Beauregard for pointing out my radius vs. diameter oops.  I've uploaded a new file that should generate the correctly sized drawers!

Spool Drawers

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4238333.

UPDATED: April 2 2020
Tweaked it more and decided to just integrate the center cap on the bottom and used a delta-shaped insert on top. 

My son and I liked the Xwing v2 movement dial design.  I decided to come up with a version that could convert the Attack Wing dials to something similar.

The three supports are wide to be symmetrical, and it reminded me of a DS9 air lock door.

Although not a true remix, I was inspired by Wind_otpof's Star Trek Attack Wing Dial Protector https://www.thingiverse.com/thing:1758561


Movement Dial holder for Star Trek Attack Wing

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:1970792.

Wanted to use this stand until I received a bamboo one I ordered, but I didn't have screws.  I added tabs in front of the screw holes that go underneath the raised holes on the screen.  Also added a small lip at the bottom to support the screen (not the glass).  The screen will fit either right-side-up or upside-down but works better upside-down. (Designed that way due to power to the Pi)

Raspberry Pi 7 inch LCD stand, Now with Tabs!

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4817560.

Just picked up Tiny Epic Western game, and glad to see tev's solution for storage.  The bottom insert was too tight for my character cards, so I decided to make a little room.  I also wanted to make it easier to pull out of the box, so reworked the corners to create a tab to grab easily.  I had a little fun with the main bottom and it makes it easy to pop the cards out, if needed.

Tiny Epic Western (TEW) storage Tweaked Bottom Tray

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4706068.

I needed a better way to measure distances for larger, odd shapes, etc.  Other than buying some, didn't see any others that were the size I wanted, so I drew these up in Fusion 360.   

"Outside Calipers x.stl" pair require the "Cap" pair to connect together.  Tight clearance to make the hinge cap secure.  Calipers will move easy enough, but not too easy for measuring.

Maximum distance is about 351mm or 13.8".




Simple Outside Calipers

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4280629.

Thank's to Morgul for his Fantasy Flight Miniatures base.  I designed this for a couple of reasons.
 - Have a base and peg to use with my MicroMachines ships.
 - Accommodate the thinner ship base card and captain tokens from the Animated Series expansion.  This base is designed to allow either (the AS captain tokens will sit lower)
 - The peg included is designed to print laying down with a flat side.  Keep in mind if you use a skirt, you may have to trim a bit to fit correctly.



Star Trek: Attack Wing Base

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:2578153.

I wanted to mount the Processing Unit (PU) on the wall near the ceiling, so I could run the headset cables across the ceiling and down.  I started by mounting the PU to the wall with 3M Command Strips, but I knew I would want to take the VR rig with me at times, so I designed and printed this holder to make that easy.

It is intended for the PU unit to sit vertically, so you can mount it via either side or from the bottom, sitting on something.  I used 3M Command Strips to eliminate the possibility of damage to surfaces.

Design has opening in the rear for airflow from the PU's built-in fan, as well as a slot in the front to keep the light and Sony logo visible.

UPDATE Nov 12 '17 - Uploaded a model with holes for screw mounting on both sides and the bottom.  3M Command strips weren't up to the task...


Playstation VR Processing Unit Holder (or KITT box)

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:2053917.

I made this over a year and half ago, just forgot to post it.  Loved the three suction cup mount for expensive cameras.  Added to it by making two holes that can be used for a tether, giving an additional safety line, in case the gopro tabs break.

The the mount this is based on, it is made for use with RAM-branded suction cups (https://www.amazon.com/Mount-with-Suction-Cup-Base/dp/B001447JYG/ref=as_li_ss_tl?ie=UTF8&qid=1508260533&sr=8-6&keywords=ram+mount+suction&linkCode=sl1&tag=theharfam08-20&linkId=1802577d8728dc2f50e625d7b642a219) , which are awesome.  I've had this mount with three suctions cups mounted everywhere on my car.  Had it sideways on my driver's side door without a problem; in the rain.

I had it on my windshield and forgot about it when some rain fell.  Hit the wipers to clear the windshield, and the wiper broke itself against the mount.  You'd think I would learn, but I did this on two different cars.  I know; stupid of me, but a good illustration of how well this stays in place on glass.

I will try to remember to upload some better pictures of it on the car.



GoPro Camera 3 suction mount with tether holes

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4271661.

*Added this version by request with a bit more room for sleeved cards.  The inner walls are thinner (1.5mm), but should still be ok.*

I liked RedWagon's design for card holder, but I want to add to it and account for the specialty cards. I also wanted to organize the bullet holes so that it would be per person, so it has 8 rows of 4, plus two extra spots for the sheriff's extra bullet and one more.

The separate card holder should be printed upward with the back to the bottom. This will still require supports, but just to support the side walls. I may redesign that to make printing a little easier, but it work pretty well.

Bang Box Organizer (for sleeved cards)

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:3023131.

Designed to mount my LED strips within my cabinet, pointing towards my printer and away from my eyes.  Made to slot together easily, and a cap for the end.

LED Holder @ 30º angle

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:2238975.

Decided I have had enough of replacing RAMPS/Arduino combos, so I decided to try out the MKS BASE V1.5.  Looks good so far, but needed to mount it in the Robo3D R1.  It is made to mount, not to the Arduino/RAMPS holes, but to the extra holes that are also underneath.

The one picture with the board is just for reference to see the size comparison.

I have printed, but not yet fitted yet, so more updates to come.

UPDATE 4/10/17: Board didn't fit right in the sideways orientation; blocked the power blocks.  Redesigned for 'vertical' orientation.  Will require internal usb cable.

UPDATE 4/12/17: Redrew the adapter to fit the board sideways.  Laying it flat would require cutting some of the internal support wall, so I angled the mount so that it holds it at roughly a 16 degree angle, allowing the USB cable to clear the wall.  Of course, if you print connected to an OctoPi (or computer), you will need to leave the cable connected internally and routed out of the case through the existing hole.  

I added a mount for a 40mm fan to blow across the right side of the board, which is where the stepper drivers reside.

More pictures to come after mounting and test fitting.

UPDATE 4/14/17: Not quite enough room for the fan, so I played around a bit more, and then change the slot/mount.  Top (which becomes the bottom) are 'bumps to rest in the holes, while the bottom are open for screws, zip ties, whatever.

RAMPS to MKS BASE 1.5 Adapter

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:3078520.

*** Correction *** This is a fixed and thickened up version of @adelille's original base.


Helping Hands Plus more Beef

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:3036227.

Needed to repair my rear seat power compartment that just stayed open.  The previous car owner's grandson apparently kicked it and broke it.    I pulled it apart and found the broken part.  (The stringiness on the original part is because I was trying to heat up the metal pin instead to remove it, but couldn't make that work)

https://youtu.be/u6FRmZztpEE

Audi A7/6 rear power compartment repair 

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:2462159.

//// 
Note:
  Before anyone makes any comments, this is not to be used while the car is in motion. Duh. 
////

I use a software tool running on a Windows tablet connected to the ODBII port to diagnose and change settings on my car.  Instead of holding the tablet, this allows me to hang it on the steering wheel.  Designed for my Audi, which has a diameter of 36mm at the top.



Tablet Holder

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:1970879.

I wanted to quickly add some LED lighting to my TAZ 6, and I had some IKEA Dioder LED lights just sitting around so these were born.  I decided on having it hold them within the frame to minimize visibility, although technically, they probably do block some of the max Z height where they are.  You can put them outward instead, which might help a little depending on the model.

Marked as a remix of Lulzbot Taz 5 Tool Caddy Holder Clamp v2.0, as I used the profile where it holds on to the 2020 as my starting point.

2020 Clamp for IKEA LEDs

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4571012.

I bought a silicone license plate holder that doesn't have 'tabs' to hold the screw, but does so from the rear. I wanted to make the screws blend in as much as possible, so created this cap to cover it.  Base is captured by screw, and top cap snaps on to it.



License Plate  Cap

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4151716.

I needed some bag clips for chips and all the really good, functional ones here were just too boring so I decided f**k it, I'll just design and print it.


Falcon Ship Clip

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:3072929.

My wife's little red cart handle latch broke, and she was using a strap wrapped around it to keep it closed up.  So I redrew it, a little beefier than the original and attached it.  A little tighter fit, but it won't go anywhere when latched in.

I used M4x25 bolts to attach.  They stick out just a bit towards the handle, but it doesn't seem to prevent the handle from seating properly.

Cart handle latch

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:1594866.

Adapter plate for Mike Kelley's modular carriage v2 that allows the stock extruder to be mounted.  I have not fully tested the mounting.
https://youtu.be/bzBm7qYMih4

Robo3D R1 Gregs Wade Adapter Plate

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4156439.

I love the YAFC for holding my filament, as it is low profile and doesn't interfere with a roll being rolled or with other rolls.  This holder was just so I can keep them in view and easily accessible when changing filament.

YAFC Holder

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:1970917.

I created these as an option for hanging IKEA Dioder LED lights in the front of the TAZ 6, pointing downward and slightly to the back.  I liked how they worked, but a little too much in the way for me.  Posting here for others to use or modify.

Disclaimer:  I had difficulty getting these to fit in my extrusion.  I ended up clipping off the tip that goes in and under the extrusion to make it fit easier.  Your mileage will vary!

2020 LED Hangers

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

SpectreGadget