This little vase was born tired and rests slumped over on a seat. The parts to be printed are two and are complementary; after printing, they must be joined together with super glue following the housing on the base. Tired Vase is a small decorative design object for your home. Print it with a 0.4 nozzle, layers of 0.1/0.16, import the STL files into the slicer, lay the upper part of the vase on its side, and activate tree supports. Use a 10/15% rectilinear infill for both parts. By printing Tired Vase in two separate parts, you can customize the colors and get the printed model quickly. The base also serves as a vase and is an extension of the upper mouth. The free version of this project features the Sparks3D logo on one side of the base. By subscribing as a Supporter or to the commercial plan, you can download a version without the brand.