The Sun Vase is a 3D printed product made with PLA+ that does not require supports or rafts during printing. The recommended printing configuration: uses a 0.4 mm nozzle, 0.1/0.2 layers, with three perimeter walls, three lower shell layers and 5 upper ones on the bottom. The internal infill is set at 15% with a rectilinear pattern, balancing the strength and lightness of the finished product.
The dimensions are designed to accommodate small indoor plants, with an internal diameter of 65.8mm and a height of 70mm, and it is equipped with a 14mm drainage hole at the bottom. The Sun Vase is scalable in the slicer to achieve dimensions suitable for individual needs.
Categories:
14 Likes15 DownloadsMarch 4, 2024