Old Moon - Wall art

This is my "Old Moon" - a portrait of an old moon - a piece made with HueForge, with a frame (with a rear hole for wall mounting) that can also be reused for other 16cm diameter images.

For Picture: Print at 100% infill with a layer height of 0.08mm with a base layer of 0.2mm Filaments Used: PLA+ Sunlu Black Transmission Distance: 0.6 PLA Overture Brown Transmission Distance: 1.6 PLA Overture White Transmission Distance: 4.4 Swap Instructions: Start with Black At layer #6 (0.6mm) swap to Brown At layer #7 (0.68mm) swap to White for the rest.

For Frame: Print at 15/20% infill, nozzle 0.4, layer height 0.2, no supports or rafts required.
Optimized files for Bambu Lab Printers included.