tracking pixel
Sparks3D.it

New Levante

by
Sparks3D.it
Follow
Follow
Remix Model
Sparks3D.it
Sparks3D.it
|
Image 1 of 4
New Levante 3d model
Sparks3D.it
Sparks3D.it
|
Image 1 of 4
New Levante 3d model
2D
3D
Makes
New Levante 3d model
New Levante 3d model
New Levante 3d model
New Levante 3d model
This model is restricted by licensing terms. 

Create a new ambiance in your home with New Levante, the LED ambiance and table lamp inspired by Japan. New Levante captures the essence of Japanese iconography, immersing you in a serene and enchanted atmosphere. New Levante embodies the magic of the sun behind the majestic Mount Fuji, surrounded by clouds or a cherry blossom branch.

To print your New Levante, if you have a Bambu Lab printer, you'll find a 3mf file optimized with Bambu Studio attached to the project. Alternatively, use the following guidelines: use low layers, for example, 0.15/0.16; import the STLs into the slicer and divide them into parts, use color change on the same piece for the solar disk (for example, red for the sun, white for the shadow and the guides for the back); do the same for the cherry branch and the snow-covered Mount Fuji. Use a 0.4 nozzle and a recommended 100% infill, as otherwise, when lit, the base and the lamp could show the shadows of the internal filling and ruin the aesthetics of the product.

In the LED Mount, attach a 8mm COB strip of the brightness you prefer, wrap it around the outside and inside face of the piece. I recommend first applying a heat-shrink gasket at the points of contact between the soldering and the plastic to prevent the plastic from melting when heated; use only 5V 1A COB LEDs for uniform, powerful, and safe lighting for plastic. Solder the strips to each other and a power cable that you will have previously passed through the hole in the cover. If you use a touch cable and a dimmable strip, you will be able to manage the brightness of your New Levante. To close the cover, make it adhere to the body of the lamp and apply super glue along the entire inner perimeter of the edge. Also for the support piece on the base, use a bit of super glue to fix it in the designated guide printed behind Mount Fuji. The reason this piece was not designed to be printed on the base is to avoid the use of supports that would damage the piece. Glue the clouds or cherry branch in front of the sun. Now New Levante can project a 360° enveloping light along the inner and outer edge behind the red sun. It creates a warm atmosphere, transforming your room into an oasis of tranquility. Mount Fuji serves as a stand for this unique lamp, adding a touch of authenticity to its beauty.


4 Likes1 DownloadsMarch 10, 2024




4 Likes1 DownloadsMarch 10, 2024
This model is restricted by licensing terms.