2D3D
Makes
Be the first to upload a Make
This model is restricted by licensing terms.
View license.
Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:3661669.
Von Kármán Haack Series Nose Cone
OD = 4.0"
OD#2 = 3.874"
ID = 3.748"
Length = 19.8"
Designed for a 4X wall thickness printing (4*0.4 mm) Concentric infill (see Figure 4)
- Infill shouldn't matter, due to nose cone thickness being (4*0.4mm)
- Printed at 0.2 mm layer height, with 0.4 mm nozzle.
- Have split into 4*(6.0") sections for printing (Complete STL also included)
- Gorillaglue seams to complete and fill/sand before making female mold.
- Edit** Use Section 4.1 for an added fillet. (Print this section upside down)
1 Likes26 DownloadsMarch 8, 2022
1 Likes26 DownloadsMarch 8, 2022
This model is restricted by licensing terms.
View license.