An optional lid for the Glue Stick Dispenser. Has a tighter fit and a lip to grab for opening.

Glue Stick Dispenser Lid v2.stl

A simple glue stick dispenser for the Bosch Gluey 7x20 mm ministick glue sticks.  Has two columns in case you want to store two different colors separately. Original file includes a simple lid, which is kinda lose, so there's version two included as a separate STL.

Dispenser body has a Multipoint slot in the back.

Note: I recommend printing the body upside down (as shown in one of the pictures) using tree supports, which will be very easy to remove.

Bosch Gluey Glue Stick Multipoint Dispenser

Glue Stick Multipoint Dispenser.stl

An updated version of Chris3DPrints' "Deburring Tool Holder for Multiboard" (find it on MakerWorld,) where I changed the hole sizes to fit my deburring tool, then I added a pattern around the circumference of the body and added a fillet. I also made - and uploaded - a parametric Fusion360 file, so that others can easily adjust the hole sizes and depths according to their preferences.

**Note**
For some reason I cannot link Chris' original design

Parametric Deburring Tool Holder for Multiboard

Parametric Deburring Tool Holder.3mf

Integrated the Multiboard Pegboard Click into a simple hanger for a pair of [Qianly Indian Clubs](https://www.amazon.de/-/en/dp/B0BMY9DDFG). Print using tree supports.

I recommend using three walls.

Multiboard Indian Club Hanger

Club Holder.step

I found that the Solder Assist kits, such as those made by [DURATOOL](https://www.google.com/search?q=duratool+ZD-151%2F87-1510), [goot](https://en.goot.jp/products/detail/sa_10), MEEC Tools, and [RND](https://www.google.com/search?q=%22RND+560-00190%22) (amongst others) come in handy when cleaning and assembling 3D-prints and when soldering components that go into the 3D-prints. So I created this simple tool holder/stand for holding them.

I printed these using add:north HT-PLA Pro Matte in a Bambu X1C and it will actually print without using support but the result - especially the sides - will be prettier with supports. 

If you want to use fuzzy skin, I recommend increasing the size a few percent as this is a pretty snug fit to begin with.

Solder Assist Tool Holder

Solder Assist Tool Holder.stl

The original "RAK Meshtastic Starter Kit - No Additional Hardware Case" (published on Printables by pdxlocs) has gaps along the bottom edge, surrounding the USB-C port in the bottom of the front cover. These gaps gives access to the reset button and visibility of the red, green and blue LEDs in the back of the RAK19007 Base Board, but I didn't like the aesthetics of them. 

The alternative front cover published in this model has three small pinholes for the LEDs, for a cleaner look.

RAK Meshtastic Starter Kit - No Additional Hardware Case - Alternative Front Cover

RAK Meshtastic Starter Kit - No Additional Hardware Case - Alternative Front Cover.stl

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

SorenTheSwede

Achievements

Seedling

Trailblazer