CREALITY K1 & K1C RAISER / DECKEL / TOP COVER / UPGRADE (VERSION 1)

You are welcome to follow us on Instagram (sektor7_studios)

Introducing the Ultimate Lid Extension for Your Creality K1 & K1C 3D Printer! (no supports needed)

Welcome to Sektor 7 Studios, where innovation meets performance. We’ve meticulously crafted a high-quality lid extension (Raiser) for your Creality K1 & K1C 3D printer, designed to elevate your printing projects to the next level.

THIS IS VERSION 1 --> WITHOUT SWING-ARM

We have designed two different versions:

• Version 1 (this one, without SWING-ARM)
• Version 2 ( Upgraded version with SWING-ARM, for advanced users) --> https://than.gs/m/1111008

Both versions have their advantages, choose the one you like the most!

OUR STL FILES OFFERS YOU:

• Perfect Fit on Creality K1 & K1C
• Enhanced Functionality
• Improved Print Quality
• Easy Installation
• More moving space for the Bowden tube
• Air supply regulation & indirect control of the temperature
• Bowden tube passage to the back and side (you can choose)
• Detailed assembly instructions are supplied as a download
• Detailed print settings are supplied as a download

THE FOLLOWING PARTS MUST BE PRINTED:

• PART_RAISER_K1 (3 times)
• PART_BACK-RIGHT_RAISER_K1 (1 time)
• TOP-COVER_LOCK (1 times)
• SLIDER (8 times)
• CONTROLLER_WITH_LOGO (8 times) or CONTROLLER_WITHOUT_LOGO (8 times)

PRINT SETTINGS (Please read the INSTRUCTIONS and the PRINT SETTINGS)

Printing Material: PLA/PETG/ABS/ASA (heat-resistant filaments are recommended, but not absolutely necessary) Nozzle: 0.4mm Infill: 15% Layer Height: 0.2mm (Attention! CONTROLLER + SLIDER with 0,1 mm or 0,16 mm layer height) Walls: 2 Support Structure: none support needed (we have modeled the supports for you in the model, these must be removed with a click after printing) Recommendation: BRIM with 5 lines, 100mm/s print speed (Attention! CONTROLLER with minimum 8 lines)

The Raiser has so far been printed on the following printers. Both could be used to print without support structures:

• K1 Max
• K1
• K1C

NOT QUITE SURE IF YOU WANT THE RAISER YET? GET AN OVERVIEW WITH OUR DETAILED MOUNTING & PRINTING INSTRUCTIONS:

• https://sektor7.studio/creality-k1-k1c-raiser-upgrade-version1/#lepopup-k1-k1c-v1-instructions

More Upgrades for the Creality K1 Series you will find here in the collection:

• https://than.gs/c/28168

Do you want to download all our Raiser versions? Or sell the printed physical products? Then use our subscription on Thangs :)

If you have any questions feel free to contact us. You can contact us under the following email:

• support@sektor7.studio

We are happy about every new follower.