Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5223425.

Please give me feedback in the comments! Print one lid and one main body. Push parts together to close box. To seal, put tape around edges. To open, peel tape. Simple as that! In the future I plan on making a version for 2x2 and 4x4. If you want a customized cube box for a different cube, please send me a comment. If you want to help support me, please go to this link: patreon.com/3DPrintingProjectUnKnown. Thank you for your support in making these projects possible!

Rubik's Cube Container

2x2_bottom.stl

2x2_top.step

2x2_top.stl

Lid.step

Main_body.stl

lid.stl

main_body.step

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5593323.

This is a box that I made for one of my high school level classes and was very proud of, so I thought I would post it on Thingiverse. One thing to be aware of is that to make the hinge of the non 3D printed hinge, you will need a paper clip. You will also need to make both the Cool Box Lid file and the Cool Box Top Layer file, making fully 3D printed version, use the Cool Box Top Layer With Lid file. Lastly if your printer is TOO precise and good (which props to you if it is) then use the pins in the files area to hold the arms on. Hope you like it as it took lots of time to design and print. If you feel so compelled to support me, join my Patreon (patreon.com/3DPrintingProjectUnKnown). No matter your choice thank you for taking a look and I hope you like the end product. If making this you will need to purchase 4mm x 2mm magnets (These are the ones I used: tinyurl.com/4mmx2mm-magnets). Please also be aware that I have not tested the paper clip version of the hinge so please tell me in the comments if it works! As always the step files are in the files area. Enjoy!!

Magnet Box with Tackle Box Style Hinge

Cool_Box_Arms.stl

Cool_Box_Lid.step

Cool_Box_Lid.stl

Cool_Box_Lowest_Layer.step

Cool_Box_Lowest_Layer.stl

Cool_Box_Middle_Layer.step

Cool_Box_Middle_Layer.stl

Cool_Box_Pins.step

Cool_Box_Pins.stl

Cool_Box_Top_Layer.step

Cool_Box_Top_Layer.stl

Cool_Box_Top_With_Lid.step

Cool_Box_Top_With_Lid.stl

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5223351.

This is a basic pencil cup. That's it. If you want to help support me, please go to this link: patreon.com/3DPrintingProjectUnKnown. Thank you for your support in making these projects possible!

Basic Pencil Cup (Customizable)

Pencil_cup.stl

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

Roprint2