This is a model of a small whistle-stop railroad depot. It has a roughly 10’ by 16’ scale footprint. If you wish to add roof overhangs you can put paper or thin card on the roof.

I print my models on a filament (FDM) printer. That's what they're designed to be printed on.

I printed this structure at 50% infill. Print the structure floor-side down and no supports will be needed.

Z whistle stop depot

whistle stop depot.stl

This is a model of a false-front building, such as a general store. It has a roughly 20’ by 45’ scale footprint. If you wish to add roof overhangs you can put paper or thin card on the roof.

I print my models on a filament (FDM) printer. That's what they're designed to be printed on.

I printed this structure at 50% infill. Print the structure floor-side down and no supports will be needed.

Z scale small false-front store

small ff building.stl

This is a model of an old-time one-room schoolhouse. It has a roughly 20’ by 30’ scale footprint. If you wish to add roof overhangs you can put paper or thin card on the roof.

I print my models on a filament (FDM) printer. That's what they're designed to be printed on.

I printed this structure at 50% infill. Print the structure floor-side down and no supports will be needed.

Z scale One-room School

one room school.stl

This is a model of a small house. It has a roughly 20’ by 30’ scale footprint. If you wish to add roof overhangs you can put paper or thin card on the roof.

I print my models on a filament (FDM) printer. That's what they're designed to be printed on.

I printed this structure at 50% infill. Print the structure floor-side down and no supports will be needed.

Z scale house

house 1.stl

This is a model of a cottage-style house. It has a roughly 20’ by 25’ scale footprint. If you wish to add roof overhangs you can put paper or thin card on the roof.

I print my models on a filament (FDM) printer. That's what they're designed to be printed on.

I printed this structure at 50% infill. Print the structure floor-side down and no supports will be needed.

Z scale cottage

cottage 1.stl

This is a model of a Valentine-style small diner that was manufactured in Wichita, Kansas. I've included two designs, one with the roof sign facing the side of the diner and one with the sign facing the front.

I print my models on a filament (FDM) printer. That's what they're designed to be printed on.

I printed this structure at 50% infill. Print the structure floor-side down and no supports will be needed.

Z scale small diner

small diner 1.stl

This is a model of a small train station, similar to ones on the Frisco railroad. It has a roughly 20’ by 33’ scale footprint. If you wish to add roof overhangs you can put paper or thin card on the roof.

I print my models on a filament (FDM) printer. That's what they're designed to be printed on.

I printed this structure at 50% infill. Print the structure floor-side down and no supports will be needed.

Z scale small train station

depot.stl

This is a model of a small post office, similar to the building that's now at a museum near Great Bend, Kansas. It has a roughly 15’ by 15’ scale footprint. If you wish to add roof overhangs you can put paper or thin card on the roof.

I print my models on a filament (FDM) printer. That's what they're designed to be printed on.

I printed this structure at 50% infill. Print the structure floor-side down and no supports will be needed.

Z Scale Structures

Category:

Tags:

Models in this collection