A simple 20mm MFT plug with a captive SAE 1/4" ID and 5/8" OD washer (used Hillman 35010). The 3MF file is for the BAMBU X1C with 50 plugs already laid out.  If you use the STL or better the STP, insert a pause in the slicer at layer 23 or so. Printed with PETG with a 0.20 mm layer height and a 0.4 nozzle. Plugs are easy to remove with a magnet!

20mm MFT Hole Plug with Captive Washer v4.3mf

20mm MFT Hole Plug with Captive Washer v4.stl

M18 Milwaukee Router 4 x 4 Baseplate on Thangs.com, a unique 3D model perfect for your special purpose baseplate creation projects. This model showcases the baseplate screws' precise position in x, y format in inches, offering you detailed guidance for any customization work. Constructed specially for the Milwaukee M18 Router, this model comes with a Fusion 360 file for easy remixing. The baseplate's standard center hole fits the Porter Cable bushing. Perfect, if you prefer to use a square plate. 

M18 Milwaukee Router 4 x 4 baseplate

M18 Milwaukee Router 4 x 4  baseplate.step

An adapter that lets you use your Milwaukee packout vacuum with Festool tools and accessories. The adapter replaces the hose end cuff for a clean interface and looks. It can be used for either male or female connections. 

The design is a remix of PLC268 'Milwaukee Packout Vacuum Hose Cuff' and Meister Edel 'Festool Vacuum Adapter Male Part' both found on Printables.

Printed in Black Duramic TPU  95A on a Bambu X1C with a 0.6mm nozzle and 0.15 layer height.


Milwaukee Packout Vacuum to Festool Hose Cuff

Packout_Vacuum_Hose_Cuff_Festool.stl

You just purchased a Zwilling Fresh & Save vacuum sealer but have a lots of FoodSaver container, these adapters are for you. One adapter is for the hose connector that connect with containers such as the marinator, the round container with the hose port, the Mason jar adapter, etc. The second one is oval shape for the plastic container with the oval flapper seal. 

The third adapter is for the wine lover that use the VacuVin wine stoppers.... no more hand pumping; bonus tips, print few of them and leave them on the VacuVin Stopper! 
All adapters have a snug fit that allow for single hand operation.

Printed on a Bambu Lab X1C in PETG with a 0.6mm nozzle and 0.15mm layer height.

Zwilling Fresh & Save adapters for FoodSaver containers and VacuVin

Zwilling Food and Save adapter for FoodSaver hose.step

This is a replacement cap for a Lezyne 500XL bike light. 
Printed in PolyFlex TPU 95A at 0.1mm layer height, 3 walls, 3 top/bottom and 20% Hilbert Curve infill.

It's designed for a snug fit so it stays put yet easy to remove when required for charging. Printed in white so it's easy to spot, but black will match the light colour. 

STEP and STL files provided. The .3mf file's for BambuLab X1C.

Lezyne 500XL USB Cap

500XL USB Cap v1.stl

500XL USB Cap v1.3mf

500XL USB Cap v2.step

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

RobDlg

Achievements

Seedling

Explorer

20mm MFT Hole Plug with Captive Washer v4.3mf

M18 Milwaukee Router 4 x 4 baseplate

Milwaukee Packout Vacuum to Festool Hose Cuff

Zwilling Fresh & Save adapters for FoodSaver containers and VacuVin

Lezyne 500XL USB Cap