OVERVIEW VIDEO:
https://youtu.be/EVXr8KzjCM8

Specs, requirements, assembly manual:
https://drive.google.com/file/d/1m1l0f4_4MBRillFdcEwS4TuaZyJ7QknP/view?usp=sharing

This is a fully 3d printable and toolless NAS case.

Features:
- 3.5'' HDD support: 6
- 2.5'' SSD support: 2
- Full-ATX PSU
- Mini-ITX motherboard
- Toolless assembly

The case is completely modular, assembles in minutes, and requires no post-processing. All in a package that is under 19 L in volume.

Please see manual for full details.

**STEP and Fusion360 files included!**
Recommended material list:

[PETG (2kg)](https://amzn.to/43YUDH2)
[Fans (3x)](https://amzn.to/4cRYsSx)
[Power Button](https://amzn.to/4cVkDHp)
[90 degree angle SATA cables](https://amzn.to/3JkwrW1)
[3-way fan splitter](https://amzn.to/3JgwsdH)

**Note:** For convenience, a ZIP archive containing all the files is available in the attachments section. 

rNAS-6X - A Completely 3d Printable and Toolless PC NAS Case

Replicrafts_rNAS-6x_CAD EXPORT_NOT FOR REDISTRIBUTION.stp

The last game controller organizer you'll ever need, completely modular, expandable, configurable, and most importantly, **100% easily 3d printed,** with parts requiring zero supports and no special settings to print.

Included is a fully illustrated and easy to read manual that will give you examples of different types of configurations.

Currently supported controllers:

- 8BitDo SN30 Pro+ / Pro 2
- Switch Pro
- Steam Controller
- Xbox 360
- Xbox One / S /Elite
- Wii Remote and Nunchuck
- Joy-Cons
- DualShock 2, 3, and 4
- DualSense
- Nintendo 64
- GameCube
- SNES
- NES

Supports Headsets too.

Additional controller support will depend on amount of community interest.

You may preview the manual [here](https://drive.google.com/file/d/1x2CrxgrteR-6w-PBDQAngEeZc-RGjEPD/view?usp=sharing)

**Note:** For convenience, a ZIP archive with all the parts is available in the attachments section. 

Ultimate Modular Game Controller Organizer

UltimateOrganizer_V4_Xbox 360.stl

THIS DOWNLOAD INCLUDES THE NECESSARY PARTS FOR **STEAMDECK, NINTENDO SWITCH (NON-OLED), AND TABLETS.**

**NO THIRD-PARTY PARTS NEEDED, FULL 3D PRINT**

_Preview manual [here](https://drive.google.com/file/d/1RVqcmyaPlM27tOZslXf5GGsM53jQoyeQ/view?usp=share_link)_


The RestDeck was designed after realizing that a lot of us use the Steam Deck in bed, and finding out that gaming for periods longer than 20-30 minutes can become tiresome for many people.

There are two ways to use your RestDeck; the standard one is by holding your Steam Deck/Switch like you normally would, and allow the arms of your RestDeck to support most of the weight of the device.

This alone alleviates a lot of discomfort for long periods of use since you’re merely balancing the device without it’s weight resting on your wrists/forearms.

The second way to use your RestDeck is by using the center legs, which allows the device to be fully rested on your bed and torso. No need to balance it. You need to use a wireless controller for this scenario, or a couple of Joy-Cons so you can have your arms fully rested on the side of the bed.

Note that a recent Steam update has allowed for the use of Joy-Cons on the Steam Deck, so this method of playing is not exclusive to the Switch.

In the case of using your RestDeck with a tablet, then the second is the only method possible as there are no integrated controls from which to hold the device, and it’s a much more comfortable way to enjoy content.

**NOTE:** Download attached ZIP archive for convenience, it includes all the files neatly organized in folders. 

Restdeck Bed Stand for Steam Deck. Fully 3d Printable.

Plate_3.stl

This is Meta Quest 2 stand to be used when your Quest is not in use, and meant to facilitate easy relocation.

It's got a small handle that allows you to carry it anywhere in the house. Very easy to use, portable, and most importantly, very easy to print.

Prints in one go without any supports.

RUBBER FEET RECOMMENDED to avoid the stand sliding around.

Please read the included instructions.


Oculus Meta Quest 2 Stand with Carrying Handle for Easy Relocation

Quest 2 Stand_nospacer.stl

This is Meta Quest 3 stand to be used when your Quest is not in use, and meant to facilitate easy relocation.

It's got a small handle that allows you to carry it anywhere in the house. Very easy to use, portable, and most importantly, very easy to print.

Prints in one go without any supports.

RUBBER FEET RECOMMENDED to avoid the stand sliding around.

Please read the included instructions.

Print volume: 132 x 158.32 x 158.19

Oculus Meta Quest 3 Stand with Carrying Handle for Easy Relocation

Quest 3 Stand.stl

This a Switch Mount that allows you to use your Nintendo Switch on the go with an official Pro controller.

What sets this device apart from the others is the unique locking mechanism that allows for quick release of your Nintendo Switch and controller, avoiding heavy scratching to your devices.

Very easy to use, portable, and strong, but most importantly, very easy to print!

Does not need any non-3d printed parts, prints with VERY little supports, and it's very easy to assemble.

Please look at the README included with the files.

Will ONLY work with the official Pro Controller.

Pro Controller Mount for Nintendo Switch Using Unique Locking Mechanism

Full_PC_LockPin1.stl

This a Switch Mount that allows you to use your Nintendo Switch on the go with a PowerA GameCube controller.

What sets this device apart from the others is the unique locking mechanism that allows for quick release of your Nintendo Switch and controller, avoiding heavy scratching to your devices.

Very easy to use, portable, and strong, but most importantly, very easy to print!

Does not need any non-3d printed parts, prints with VERY little supports, and it's very easy to assemble.

Please look at the README included with the files.

Will ONLY work with PowerA GameCube Wireless Controller.

Power A Gamecube Controller Mount for Nintendo Switch Using Unique Locking Mechanism

Full_PA_LockPin1.stl

The best Nintendo Switch cart holder/case you'll find!

Holds **18 game carts**, allows you to quickly find them by rotating the bottom.

Also holds 4 MicroSD cards.

Prints really easily in just 2 parts. Fits in your pocket, and is really strong and sturdy!

Please read the included README.

Replicrafts Nintendo Switch 18-Cart Storage Case

Base.stl

This is a keychain holder made especially for the **8bitdo Micro controller**.

It will allow you to easily take your controller anywhere, while ensuring a very snug and secure fit. 

Very easy to print. 

_Please read attached PDF for instructions._

8bitdo Micro Keychain Case

8bitdo Micro Keychain Adapter.stl

**↓** 3 models per month
**$** Commercial License

Starter - Commercial

Bringing you amazing 3d prints with superb functionality you won't see in commercial products. 

By joining you help support continued development of modular and expandable 3d printed gadgets.


Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

Replicrafts

Select a membership plan