Rebel Alicorn Designs

Hello to all my late-night Rebels. Spike the turtle is now available and I have added him to the welcome pack collection. As I continue designing, I will update the welcome pack with more designs. The Chinese New Year snake is on the bed being printed all pretty and should be available later tomorr

Hello, all my favorite Rebels! Somehow I managed to release a football fan turtle for Monday night! Sometimes things work out perfectly. Happy (American) football season. This little turtle is all painted and ready for you to customize its colors for your favorite team. There is a sneaky peek of Sp

Good morning! I am so happy to say that the dogwood flower baby dragon is now available. This little buddy and all the little flowers were quite the challenge.  I can't believe I am saying this but it is about time to switch seasons again. I may have one or two more Christmas turtles, but the

Continuing the flowers of the 50 states, I bring you the orange blossom turtle. This covers Florida's state flower and he's also an orange for part of the citrus turtle collection request. Later...probably one of those late-night posts when it's quiet in my house...the dogwood blossom baby dragon w

Good morning everyone, We officially have a new little cutey, gingerbread narwhal, joining the designs. He joins the other cute gingerbread designs of the season. We also have cinnamon roll turtles fresh out of the bakery today as well. For the end of the week, we will have Mr. Grumpy Gingerbread B

Super late evening to everyone. My printer decided that it wanted maintenance before it would let me print anymore....5 hours later...I finally got it printing some cuties again. The dream dice tower and I'm going to call the other version a knick-knack holder is released. Tomorrow there will be so

Normally I get files up in the afternoon, well my kid bonked my computer after I was done updating most of Discord with my mods. Stormbringer Lightning Baby Dragon is now uploaded, slightly later than I had planned, but uploaded. I did a couple of different files this month for gift-like items or j

Well, this year seemed to fly by....we're in the home stretch of the year, December...yay! Santa Kitty and Praline the pecan pie turtle have landed. Lightning Baby Dragon will be available later today. I will post the upcoming turtles, dragons, other critters, a dice tower, and some other things a

Hey there everyone, hope you had a fantastic week. I did a lot of design drops this week, your printers shall be busy. I know mine have been. Big, big thank you for downloading the Ginger Kitty, and sharing your makes. They were so cute. The rest of Santa's Helpers will be available next week alon

This weeks free for personal use unless you are a merchant tier subscriber design is a cute little Santa's Helper Kitty. Don't forget to like, add to a collection, and if you're feeling extra generous share a make once you are done printing the little cutie. Thank you and happy printing!

Hey there everyone! So I have an in-person event on Saturday, which means I will have a few extra models released this week that I have been holding on to and finishing up. I am way above the four models a month that I say I'll do...but I think you all like getting the extras. So releasing this wee

Hey everyone! Milk and Cookies are released. I barely got the posts up and so much positivity. You all are so wonderful and nice. All designs for today have been uploaded and now I have to go fill my printers with all the new designs you haven't seen yet. Have a wonderful night and more designs and

I made a boo-boo and printed the milk container in the wrong size for the dragons in color...so that's printing away and I will upload all of the cookie critters later. Come to find out the turtle fits perfectly in the smaller size, so now I have to print the lid to verify it closes with the size t

Good morning everyone! The Poinsettia turtle is now available, the hanging version for ornaments or other hanging needs will be available later today. Of course, many more turtles are coming this month including the winning book turtle which went through its first test print yesterday. With some mi

The mistletoe baby dragon is now released to all subscribers. He was requested many times and I finally made him all cute and cuddly. The book turtle was the winner of the poll by a landslide. No worries to those that wanted waffles or coffee, those turtles will be making their debut also. Once the

Hey Everyone, Baby Spike and his crystal home are now available. This little dragon series is a lot of fun and now I have added a baby dragon list to discord as well, so if you have an idea and your're on discord don't forget to add it. The extra long turtle list is on there as well. That one I am

Well, October has come and gone, and what a month it has been. There were 18 designs this month. Currently, I feel like I got hit by a truck. My kids decided to share a germ that is kicking my butt. I did get all the designs up that I said I would. Hope you all like the new advent top, the next

Morning everyone! Gingerbread dragons are here along with their cute little house. Throughout the week there will be some additional files dropping. One is a deeper cloud box and I have turned a couple more turtles into keychains. A member requested the gingerbread house to become an ornament so th

Good morning everyone! The cloud dragons and their cloud home are uploaded. I will be uploading some more designs a little later, a ladybug and a frog that are part of the welcome pack that I missed. I'm waiting for the 3mf version of the deer to finish printing and he should be up tomorrow. There

Evening everyone! I have now uploaded a fox, mushrooms, and Spike 1. I uploaded the Spikes in reverse for some reason. I'm sure everyone was hoping for turtles but they are getting all dolled up for their premiere aka I need to paint and print the 3mf files to make sure those are good too. Talk to

Good morning everyone, hope everyone is doing well. Spike 2 is now available and Spike 1 will be going up later today. They are both chonky spikey boys. I will make some less pokey dragons in the future, these were a request from my teenagers and everyone voted that both should be available. A dice

Thank you everyone for the responses to the dragon poll. Both Spikes will be released next week. The cutie poison turtle has been released. He is the last turtle of the month, but of course, I will have more turtles next month and the months after. Happy printing and if you are all safe if you are

Good evening everyone! The advent wardrobe has been uploaded and is ready for you all. This has been a big project, I hope you all like it as much as I do. Some spooky minis will be released throughout the rest of the month. I will release themed minis on the months the top is updated the next the

Two designs today...my cutie opossums and of course, I have to make turtles...Mac the Apple Pie turtle has landed. Hope you all are having a great day and don't forget about joining discord for extra sneaky peaks.

Al has been uploaded and Peggy couldn't be happier. Some of you may not get the little story I posted with Al, it's okay...I was being silly. I have lots of little prints going right now and my printers are busy doing their thing...I just hope that the printers don't act like little divas in the ne

This months focus is smaller articulated critters, but I will have some other designs mixed in. I will be uploading a couple versions of the critters, which can go with a larger project I have been working on, which will be released mid month. This weeks free file is a bat duck named Wayne. Have a

Good morning, The spider cat is now available for paid members. One got all excited about a new movie coming out and is ready for the red carpet. Another design will be out in a couple days. Happy printing.

The final turtle of the month has been uploaded. We will have at least four more next month. Happy Printing!

Good Evening. This weeks free file is a pumpkin rubber duck. Don't forget to upload your makes to join the makers contest, like, and add him to a collection. The dragon turtle and pumpkin head articulated creatures have been uploaded and are available to paid members. Happy Printing.

Here is a cute pumpkin bat to add to your Halloween decor, he’s free for personal use until Friday. Happy Printing!

Due a couple people having issues with the original skeleton duck files, I have updated them to utilize less supports.

Spider turtles are live and ready to hang out with you. Painted 3mf file included. The rest of the turtles will be available soon.

Good morning, this design is in the final stages and will be ready soon. Like all of the larger designs, it will have a multipart file.

Good morning,While finalizing the last pieces of the pumpkin hut, I also started finishing up projects that have been in idle. Two have already passed testing and they will be available soon. More designs coming soon.

Happy Monday, three new designs available this morning. Two cute skelly snails and my follower celebration awkward bunny.

This weeks free model for the week is a sweet kitty that has been hollowed and can be used as battery operated tea light holder or a led lamp if upsized.

Just a sneak peak of another August design…

I’m working hard in the background. This witch is offering you an apple..but is this a good witch or a bad witch? That’s up to you to decide.

Hey everyone, we always need more of this cute ghost walking. Members now have two variations, ghost walking a cat and a witch ghost walking a cat. We also hit 50 models models uploaded!

The last two files of the month have been released. I have chosen to make the Dog walking ghost free to the community for personal use. As a thank you for all of your support.

Two new files available for members. The Stitch sky puppy and Sky Kitty door knocker. We’re up to 13 designs this month. Happy printing.

New. Model coming soon…a sky puppy. Test printing today will be uploaded as soon as it is ready

I started a stitch pet series of articulated animal, so far we have a bunny, cat, and now a dog is coming soon.

I know it’s not a dragon or a normal thing but when the toddler makes a request for a kitty mushroom…I make it. I figured I would add it to the collection since maybe someone else would think it’s cute too. Just waiting to test print them, currently the printer is busy finishing the flowers for the

I finally got the candles to look the way I wanted them. Candles are on test print. I made a separate flower dragon skull that printed well, it’ll be uploaded soon. Apparently, I can only upload one picture at a time on here for updates. I’m still working on a dog to go with the cauldron project…I

The first three July releases will be available soon. Just finishing up pictures and making this cute dragon big enough to hold lots of candy, cookies, things, and stuff.

The littles requested a big dragon so here it is, it’s 35 inches long at 100%. Releases July 1 as a membership exclusive.

I’ve wanted to make an alicorn for a little while now and finally made one I like. With making an alicorn, I now have an earth pony and a unicorn also.

New release, the flower wyvern. This is a June member exclusive.

This is my current favorite in my collection so far. My first test print became a tablet holder and the next one I realized it could hold controllers, phones, glasses, etc. I am still working on a wall mount version, just need to add a way to hang it from the wall and make sure the claws are placed

Just a sneak peak of a model that's in test print phase. Gotta love dragon toe beans

I have uploaded most of this months models. I have a couple more designs that are nearing completion. I decided that all models except for the member exclusive are available to be purchased by everyone, however the membership is still the only way to be able to sell the physical prints.

Axolotl test prints are complete, file will be available in June. All joints works at 25%.

In the final phase of testing this cute little axolotl. 12th time is the charm? Maybe 13th 😅. I’m pretty sure the littlest one at 25% will be extra fragile, it’ll end up being in my tiny pet zoo.