tracking pixel
Protopasta

Protopasta Lamp base + DIY customizable shade

by
Protopasta
Follow
Follow
Remix Model
Protopasta
Protopasta
|
Image 9 of 23
Protopasta Lamp base + DIY customizable shade 3d model
Protopasta
Protopasta
|
Image 9 of 23
Protopasta Lamp base + DIY customizable shade 3d model
2D
3D
Makes
Protopasta Lamp base + DIY customizable shade 3d model
Protopasta Lamp base + DIY customizable shade 3d model
Protopasta Lamp base + DIY customizable shade 3d model
Protopasta Lamp base + DIY customizable shade 3d model
Protopasta Lamp base + DIY customizable shade 3d model
Protopasta Lamp base + DIY customizable shade 3d model
Protopasta Lamp base + DIY customizable shade 3d model
Protopasta Lamp base + DIY customizable shade 3d model
Protopasta Lamp base + DIY customizable shade 3d model
Protopasta Lamp base + DIY customizable shade 3d model
Protopasta Lamp base + DIY customizable shade 3d model
Protopasta Lamp base + DIY customizable shade 3d model
Protopasta Lamp base + DIY customizable shade 3d model
Protopasta Lamp base + DIY customizable shade 3d model
Protopasta Lamp base + DIY customizable shade 3d model
Protopasta Lamp base + DIY customizable shade 3d model
Protopasta Lamp base + DIY customizable shade 3d model
Protopasta Lamp base + DIY customizable shade 3d model
Protopasta Lamp base + DIY customizable shade 3d model
Protopasta Lamp base + DIY customizable shade 3d model
Protopasta Lamp base + DIY customizable shade 3d model
Protopasta Lamp base + DIY customizable shade 3d model
Protopasta Lamp base + DIY customizable shade 3d model
This model is restricted by licensing terms. 

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:6113053.

We hope this fun lamp design brightens your day!

3 lamp shades provided for your enjoyment and to demonstrate what's possible.

Design your own lampshade following this tutorial: https://youtu.be/MGb4gvUI7M0

Lampshades are 3D printed with Protopasta's Bottle Brown, Cobalt Blue, and Soda Green Translucent HTPLA filaments available at http://www.protopasta.com. For sturdy, but still translucent shades, we recommend the following settings:

extrusion width: 0.9 mm layer height: 0.4 mm speed: 20 mm/s

We print with no slowdowns using spiralize (vase) mode for a continuous extrusion with no start/stop defects.

The base can be printed with typical settings like:

extrusion width: 0.42-0.63 mm layer height: 0.15-0.25 mm speed: 20-30 mm/s 2-3 walls 4+ top/bottom and infill for support

We recommend printing upside down.

Here is a link to fixture used for lamp: https://a.co/d/aUivaHm

We used a standard LED bulb. Be careful not to select a hot bulb that melts that plastic. Consider a dimmable bulb to adjust the light level to your preference.

Design commissioned and inspired by June's Endless Pastabilities Filament Subscription. Subscribe to support future designs and get 3 new Protopasta colors every 2 months: https://www.proto-pasta.com/products/endless-pastabilities

More about Protopasta x CM Design Collaboration at Protopasta.com/blog

Enjoy creating your own lamp! Can't wait to see what you make!!!

All our best,

Alex and the Protopasta Team


11 Likes20 DownloadsJuly 10, 2023


11 Likes20 DownloadsJuly 10, 2023
This model is restricted by licensing terms.