Make your home feel like home.

The design is inspired the orbits of the planets around that big bright thing we call the sun.

Printed in vase mode, it provides a perfect atmosphere for your home, bedroom, or office. Built to accommodate the affordable IKEA Strala Cord Set available in most countries Printed with PLA material and specifically designed to use a LED bulbs. 

Print Settings for Shade:
- Vase Mode
- 0.4mm layer height
- 0.6mm layer width
- 20mm/s initial layer
- 50mm/s speed

The shade is easily removable from the base, allowing you to switch out lamp shade colors; mint, brown, pink, blue, green.

Please note, the base is a separate file found in the lighting folder, available in a base or stand variants. 

Experience creating this unique lamp tailored to add a unique glow to your home decor.

Orbitier Lamp Shade

Orbitier.3mf

I was annoyed by the amount of planters that lack a drainage tray, and the ones that do are way too expensive.

The Selene Pot is the solution. It's unique, functional, and aesthetic. 

Print Settings:
- Layer Height: 0.2mm
- Layer Width: 0.42mm
- Wall Loops: 2-3 
(3 adds a nice weight to the pot, more filament used)
- Initial Layer Speed: 20mm/s 
- Print Speed: 150mm/s
- Supports: None needed
- Print by object

Selene Pot with Tray

Selene Planter.3mf

Make your home feel like home.

The design is inspired by the boiling of water, perhaps for a nice big pot of pasta.

Printed in vase mode, it provides a perfect atmosphere for your home, bedroom, or office. Built to accommodate the affordable Ikea Strala Cord Set available in most countries Printed with PLA material and specifically designed to use a LED bulbs. 

Print Settings for Shade:
- Vase Mode
- 0.4mm layer height
- 0.6mm layer width
- 20mm/s initial layer
- 50mm/s speed

The shade is easily removable from the base, allowing you to switch out lamp shade colors; mint, brown, pink, blue, green.

Please note, the base is a separate file found in the lighting folder, available in a base or stand variants. 

Experience creating this unique lamp tailored to add warm glow to your home decor.

Bubble Lamp Shade

Bubble Lamp.3mf

A finned lamp design that illuminates and delights.

The design is inspired by the unfurling of a flower, adding life to your space.

This STL includes the lamp shade pictured.

The lamp base is the Ikea Ackja lamp base, the shade is designed to screw into the fitting perfectly. The Ackja base is widely available in at Ikea.

Printed with PLA, make sure to use LED as they emit little heat.

Print Settings for Shade:
-Vase Mode
-0.4mm layer height
-0.6mm layer width
-50mm/s speed


For more pictures and details on the finished product go to https://pocketpickedit.com/

Ackja Lamp Shade

Ackja Lamp Shade.3mf

I was annoyed by the amount of planters that lack a drainage tray, and the ones that do are way too expensive.

The Apollo Pot is the solution. It's unique, functional, and aesthetic. 

Print Settings:
- Layer Height: 0.2mm
- Layer Width: 0.42mm
- Wall Loops: 2-3 
(3 adds a nice weight to the pot, more filament used)
- Initial Layer Speed: 20mm/s 
- Print Speed: 150mm/s
- Supports: None needed
- Print by object





Apollo Pot with Tray

Apollo Pot Large 85% (15h,480g).3mf


This model is the lamp stand for the Bubble Lamp and the Orbitier Lamp.

It is designed to perfectly fit a Strala Lamp Cord from IKEA.

Prints in 3 parts, a small amount of adhesive is necessary.

All models that are compatible with this stand are also compatible with the Strala Base.


Print Settings:
    - Layer Height: 0.2mm
    - Layer Width: 0.42mm
    - Wall Loops: 3
    - Build Pattern: Concentric
    - Initial Layer Speed: 25mm/s
    - Print Speed: 100mm/s
    - Supports: Enabled, Snug (very small amount for cord hole)

If needed parts are in separate STL files as well. 


IKEA Strala Lamp Stand

Strala Lamp Stand.3mf

Strala Lamp Stand Part 1.stl

Strala Lamp Stand Part 2.stl

Strala Lamp Stand Part 3.stl

- This model is the lamp base for the Bubble Lamp and the Orbitier Lamp. 

- It is designed to perfectly fit a Strala Lamp Cord from IKEA. 

- Prints in 2 parts, a small amount of adhesive is necessary. 

- All models that are compatible with this base are also compatible with the Strala Stand. 

Print Settings:
- Layer Height: 0.2mm
- Layer Width: 0.42mm
- Wall Loops: 3
- Build Pattern: Concentric
- Initial Layer Speed: 25mm/s
- Print Speed: 100mm/s
- Supports: Enabled, Snug (very small amount for cord hole)

IKEA Strala Lamp Base

Strala Lamp Base.3mf

Hello there! Welcome to my Thangs page. I'm in the process of adding all my models here over the next few weeks. From then on I will be releasing new models atleast every 2 weeks. I will be adding more variations of lamp shades to fit the Strala base, larger and smaller versions, and new home things. Thanks for being here, if you have any questions send me a message at @pocketpickedit.

 Hello there! Welcome to my Thangs page. I'm in the process of adding all my models here over the next few weeks. From then on I will be releasing new models atleast every 2 weeks.  I will be adding more variations of lamp shades to fit the Strala base, larger and smaller versions, and new home thin

Hello!

A collection of unique lighting, functional plant pots, &amp; home things.

With this membership you can print &amp; sell the printed products.

All Access

Hello! I design and create home things.

- Mood Lighting
- Table Lamps
- Planters
- Vases
- Other home things

With a membership you gain access to all my models, and the license to print and sell them.

I upload 2-4 designs a month. 

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

pocket

Designer posts

Hello!

Pinned models

Ackja Lamp Shade

Bubble Lamp Shade

Selene Pot with Tray

Orbitier Lamp Shade

Orbitier Lamp Shade

Selene Pot with Tray

Bubble Lamp Shade

Ackja Lamp Shade

Apollo Pot with Tray

IKEA Strala Lamp Stand

IKEA Strala Lamp Base