This is an adaptor for the Fitbit Charge 5 or Fitbit Charge 6, so that you can make your own watch bands. This works well for paracord bracelets, but you can get creative and use anything you want. 

You might need to sand it and wiggle it around as it might not fit in perfectly at first. You do need supports to print this.

Scale up print by 10

Fitbit Charge 5/6 Band Adaptor

FitBit Adaptor working v2.obj

This is a cap for DIY badge pins using regular needles and pins. I made this because I did not have any of the thicker pins made for this project, so I instead cut up regular pins and glued them on the backs of my badges. 

Again is 0.9 mm and again but bigger is 1 mm, so hopefully one of those work. I made the badges/pins by laminating paper in hot glue, and I glued the pins on with epoxy.

Badge pin cap for needles

again but bigger.stl

Printer: Ender 3

Infill: 20%

Rafts: Doesn't matter, although I used one

Print Speed: 20

Supports: yes

Filament: PLA

I am new to blender, so there is a tear in the model that it would not show me until printed. I do not really know how to fix it, but I shoved some air-dry clay into the hole and it is hardly noticeable. 

Custom Section
You might want to scale up the model as it starts of somewhat small. I scaled it up about 160%. Otherwise, I will be pretty difficult to put in the hair and tail.

Custom MLP Base

MlpBase1_smooth.stl

This is a DIY enamel pin base. I filled mine in with puffy paint and glues a pin base to the back. You can also use this to make charms. 

mantid enamel pin

mantid enamal pin.stl

Summary
This is my model of the Meowmere sword from Terraria. It is printed in two parts to make it easier. I will be modeling a stand for it later. 

Printer:

Ender 3

Supports:

unnecessary

Platform adhesion:

brim

Infill:

20%

Resolution:

1.5

Filament:

PLA

Important Note:  You might need to increase the thickness especially on the back half because I made the handle a little bit too thin. I will try to fix this in the future. This is one of the first things I have ever made, so I will try to improve on stuff like this in the future. 

Post-Printing
Just glue it together and paint it. 

meowmere.stl

One of My first 3D models. It is only one side, so if you want it two-sided them you will have to mirror it and glue it after printing. I made this model as a project for my Computer and 3D printing class last year.

Terra Blade.stl

I am working on a few models and I want to know what you want to see most. What should I have as my top priority: horse-centipede, cute-ugly keychain/bag hangers, reptile vases, or sculpting tools?If look look forward to any of these, let me know which one, and I will work harder on it and upload it first,

 I am working on a few models and I want to know what you want to see most.  What should I have as my top priority: horse-centipede, cute-ugly keychain/bag hangers, reptile vases, or sculpting tools? If look look forward to any of these, let me know which one, and I will work harder on it and upload

What Next?

MlpBase1_WithHorn.stl

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

Poodlecorn

Achievements

Seedling

Designer posts

What Next?

Pinned models

Custom MLP Base

meowmere.stl

Fitbit Charge 5/6 Band Adaptor

mantid enamel pin

Fitbit Charge 5/6 Band Adaptor

Badge pin cap for needles

Custom MLP Base

mantid enamel pin

meowmere.stl

Terra Blade.stl