gazzaladra

Trash can with swing lid “Glitch”

by
gazzaladra
Follow
Follow
Remix Model
Paul_The_Llama_Guy
Paul_The_Llama_Guy
|
|
Image 8 of 8
Trash can with swing lid “Glitch” - Very useful and looks great! - 3d model
Paul_The_Llama_Guy
Paul_The_Llama_Guy
|
|
Image 8 of 8
Trash can with swing lid “Glitch” - Very useful and looks great! - 3d model
2D
3D
Makes
instagram-play
Trash can with swing lid “Glitch” 3d model
Trash can with swing lid “Glitch” 3d model
Trash can with swing lid “Glitch” 3d model
Trash can with swing lid “Glitch” 3d model
Trash can with swing lid “Glitch” 3d model
Trash can with swing lid “Glitch” 3d model
Trash can with swing lid “Glitch” 3d model
Trash can with swing lid “Glitch” - Very useful and looks great! - 3d model
This model is restricted by licensing terms. 

A beautiful trash can suitable for your home, office and especially bathroom. The container can be used with or without the print-in-place swing lid. The shape is inspired by old videogames where the resolution did sometimes not fully load.

Included versions: A: Regular

  • Body_regular: The body with 230mm height (default)
  • Body_regular_vasemode: the body to print in vase mode
  • Lid_regular: the Lid – print-in-place (default and recommended)
  • Lid_regular_seperated_1 and - - Lid_regular_seperated_2: Both parts separated – print them this way if your printer tends to mess up gaps - to join them just bend the ring a little and insert the lid

Size assembled: 210 x 192 x 255 mm Volume: 5 Liters

B: Small

  • Body_small: The body
  • Body_small_vasemode: the body to print in vase mode
  • Lid_small: the Lid – print-in-place (default and recommended)
  • Lid_small_seperated_1 and - Lid_small_seperated_2: Both parts separated – print them this way if your printer tends to mess up gaps - to join them just bend the ring a little and insert the lid

Size assembled ca: 138 x 120 x 163 mm Volume: 1 Liter

This is the V3

Print settings Material usage regular: Body 250g; Lid 150g Print time regular: Body 15h; Lid 10h

Material usage small: Body 100g; Lid 80g Print time small: Body 6h; Lid 5h

Material: PLA Print direction: stls are rotated correctly, check images Support: none Nozzle size: 0,4 mm Line width: 0,4 mm Layer height 0,2 mm Outer walls: 3 Infill: 20% Build plate adhesion type: none


52 Likes82 DownloadsOctober 5, 2023


52 Likes82 DownloadsOctober 5, 2023
This model is restricted by licensing terms.