Oppenheimer 3 Colour Filament Painting

Made with HueForge personal addition. Not for commercial use. If too big, I recommend scaling just x and y. Print at 100% infill with a layer height of 0.08mm with a base layer of 0.2mm

Filaments Used: PLA BambuLab Basic Black Transmission Distance: 1.2 PLA BambuLab Basic Gray Transmission Distance: 2 PLA BambuLab Basic Jade White Transmission Distance: 4

Swap Instructions: Start with Black At layer #4 (0.44mm) swap to Gray At layer #13 (1.16mm) swap to Jade White for the rest.