AMS not required, manual swaps work great with this print, although an AMS is helpful with Filament Painting projects

This picture was hand drawn digitally and printed using HueForge.

**You can customize the colors of the car with this design. In your slicer when you swap to Purple, use any color you'd like, and only the car color will change. **

Stl and 3mf file included

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm ** Filaments Used:** PLA PolyTerra Charcoal Black Transmission Distance: 0.3 PLA Sunlu Meta Grey Transmission Distance: 3.5 PLA BambuLab Basic Jade White Transmission Distance: 5 PLA PolyTerra Charcoal Black Transmission Distance: 0.3 PLA PolyLite Purple Transmission Distance: 4 PLA BambuLab Basic Jade White Transmission Distance: 5 ** Swap Instructions:** Start with Charcoal Black At layer #11 (0.96mm) swap to Grey At layer #14 (1.2mm) swap to Jade White At layer #21 (1.76mm) swap to Charcoal Black At layer #23 (1.92mm) swap to Purple At layer #28 (2.32mm) swap to Jade White for the rest.