This picture was hand drawn and printed using HueForge. The HueForge snaps into the printable Frame included. Recommended to print the Frame at 100% infill. If you have any questions or need support, feel free to reach out on my new community Discord!

Stl and 3mf file included for both the Frame and the Hueforge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 203x152.88mm in size

Filaments Used: PLA PolyTerra Charcoal Black Transmission Distance: 0.3 PLA Epax Blue/Pink Transmission Distance: 7.8 PLA Bambulab Basic Blue Transmission Distance: 2.8 PLA Bambulab Jade White Transmission Distance: 6 This print uses 4 unique filaments

Swap Instructions: Start with Charcoal Black At layer #36 (1.56mm) swap to Blue At layer #43 (1.84mm) swap to Blue/Pink At layer #51 (2.16mm) swap to White for the rest.

If you like what I do feel free to follow and check out my social media pages to stay up to date with whats coming next!

https://linktr.ee/neokoiprints