These super adorable little ones are really floppy and fun to fidget with and hold.
There are 3 printing options- curled, straight (for belt printers) and separated body and tail for easier enlarging or to fit a smaller build plate. They are all the same size wise and should be printed at 100% or larger.
They are 12" long when printed at 100%. At 135% they are 16.5" long.
General Settings : ◽️ No supports needed! ◽️ 3+ perimeters (the more the stronger it will be). ◽️ Inner before outer wall. ◽️ Slow down outer wall speed. ◽️ 0.2 maximum layer height. 0.1 for best detail. ◽️ 15%+ infill. ◽️ Enable bridging. ◽️ Make sure to have good bed adhesion or use a brim! Made for FDM printing.
Please feel free to share images of your prints, I would love to see what you do with them! ^_^
All MysticSaige models are for personal use only. You may never alter, redistribute or sell my files in any way.
If you are interested in selling 3D Prints of my models, you may acquire a commercial license and other perks through my Patreon or Tribes memberships.
Happy Printing!!